LABORATÓRIOS DE PESQUISA AMES MSS1 Revestimento de teto com estiramento máximo, 1 galão, branco branco 1 galão de membrana

Name: LABORATÓRIOS DE PESQUISA AMES MSS1 Revestimento de teto com estiramento máximo, 1 galão, branco branco 1 galão de membrana
Brand: AMES RESEARCH LABORATORIES
SKU: 0856955000578
Price: 122.24 EUR
Availability: InStock

Brand:AMES RESEARCH LABORATORIES

3.5/5

€
122.24

1 Galão - Nosso selante de telhado à prova d'água é embalado em um balde de 1 galão. Projetado para manutenção de telhados de baixa inclinação em telhados metálicos, telhados embutidos, telhados laminados e muito mais. Não tóxico, ecológico, baixo VOC e fabricado nos EUA. 650% de alongamento - não lasca, lasca ou descasca - revestimento e selante elastomérico e emborrachado. O material de cobertura de borracha é 88% reflexivo de luz, resultando em custos de resfriamento reduzidos. Pincele, role ou pulverize!. O Ames Maximum-Stretch adere a telhados de metal, alcatrão, telhados laminados e muito mais. Use como selante de teto para trailers, selante à prova d'água, material de borracha para telhados e muito mais. Projetado para manutenção de telhados de baixa inclinação. Ames Maximum-Stretch é um revestimento e selante branco, elastomérico, acrílico e emborrachado para telhado com 650% de alongamento para resistir a rachaduras e descamação. Com 88% de refletividade de luz, o acabamento branco brilhante reduz as temperaturas da superfície, resultando em menores custos de resfriamento.

Quantia

adicionar ao carrinho Comprar agora

EAN: 0856955000578

Categorias Ferramentas e Melhorias Domésticas, Hardware, Adesivos e selantes, ,

Brand	AMES RESEARCH LABORATORIES
Color	White
Item Weight	10.5 Pounds
Material	Rubber, Acrylic
Style	Compact

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Sherri

Good Value, Stopped The Leaks!

Pretty easy to apply. Did a nice thick first coat with a brush which used a gallon. Then I used another gallon a few weeks later to apply two lighter coats with a paint roller. Solved a few leaks we were having! Motor home was 21 feet long.

Scritto da: keith kolheffer

Good stuff

OK ????

Scritto da: taylor

Applies thinner than I hoped for

My application is non-standard, I am using it for an interior decorating project. I hand brushed it on pre-primed furnace ductwork to act as appearance-grade sound deadener and sealant. I am planning a smooth finish topcoat of metallic bronze color. Heavy bodied product when I was hand-stirring, but when brushed it spread much thinner than I was expecting. First coat did not want to grab and it spread thin. Second coat was better. Not sure if a 3rd coat will be worth the effort and expense. Two coats of this product are slightly thicker than two base coats of latex metal primer. This product is not intended for close-up interior finish grade, but it might be versatile enough to work. Low odor dissipates quickly, easy to work with, required minimal stirring with a common flat stir stick. Water clean up was as easy as latex paint.

Scritto da: "Paco Sanchez"

Good product & value, but temperamental to put on.

I used this on my camper roof. It's a smooth metal roof in good condition so I didn't want to cover the good roof surface if not needed. However, all the vents & railings, etc., were getting a little... tired? looking, around the screws & stanchions. So I cleaned and prepped the entire roof and all the items. Then taped off to only paint around the perimeter where the railings and vents and A/C are. (Basically, everywhere anywhere near screws.) Cutting in everything was done with a brush. The paint is much thinner and slipperier than I expected. Thought it would be more sticky & heavy. So it didn't cover easily. (had to use a soft brush to not pull to much off when applying. Rolled the rest and it had a tendency to not lay down very thickly. Also, a big problem, was that it bubbles a lot when rolled on. If you let it sit a few seconds (to tack up) as you move on, then go back and lightly roll over it to pop the bubbles and even it out, it gives a really nice even finish. Sadly, I had to do that 3 times to get enough thickness. In the end, it came out very nice. This stuff reeeeally sticks well (on almost anything including your hands). I saw quite a few people say it didn't cover as much as stated. But I found it covered quite a bit of surface and all 3 coats equaled about the amount they stated for coverage. (In my case, about 50 sq. ft. & 1/2 can.)

Scritto da: guillermo

cumple el cometido

correcto

Scritto da: Haroutiun

Sealer for roof leak

I purchased this product because of the price and was very happy with how effectively it prevented any leaks on my roof. It also sealed the roof from any future leaks In problematic areas on my roof.

Scritto da: Kimberly Calehuff

My pop up

It covers great and is actually is very nice white.im happy with it

Scritto da: Michael davis

Works

For price did a great job used on RV trailer top in bad shape to stop leaks and did very well still holding in heavy downpours gulf coast US!