Suportes de elevador Summit Outdoors E1088, casinha de aço para construção, conjunto de balanço, casa na árvore e suportes para cervos, 4x4 (conjunto de 4) preto

Brand:Elevators

3.8/5

236.47

Economize tempo com nossos suportes de elevador de ângulo composto E1088 4 x 4. Nossos suportes de elevador são construídos nos EUA e apresentam mais de 30% de aço premium do que qualquer concorrente, o que significa que eles não são apenas mais fortes, mas também construídos para durar mais. Nossos elevadores são projetados para suportar os elementos e podem suportar ventos fortes e temperaturas geladas que outros não podem. Cada 4x4 insere 5,75” para garantir a máxima segurança e robustez. Nossos elevadores de aço de calibre 12 para serviço pesado também apresentam juntas soldadas roboticamente e são fortes o suficiente para suportar teatros faça você mesmo, plataformas de balanço, cortinas de veado ou decks independentes. Os elevadores são projetados com um ângulo de 8° que é cientificamente comprovado como o ângulo ideal para suportar cargas verticais e evitar oscilações laterais. Em seu próximo projeto, utilize os originais e melhores suportes Elevators, sempre fabricados nos EUA. 4 elevadores E1088 individuais incluídos.

Fabricado nos EUA: somos o fornecedor original e mais confiável de suportes de elevadores cegos para veados. Construa melhor: nossos elevadores multifuncionais/suportes de estande de cervos apresentam um ângulo de 8° que é cientificamente comprovado como o ângulo ideal para cargas verticais e para evitar oscilações laterais. Design patenteado: nossos suportes de casa na árvore fáceis de usar apresentam orifícios pré-perfurados para parafusos de fixação ou parafusos de carruagem e são ideais para a construção de teatros estáveis, plataformas de balanço, decks independentes ou suportes de árvores de veado. Construído resistente: feito de aço premium de calibre 12 resistente com juntas soldadas, nossos elevadores de suporte de veado são mais de 30% mais fortes do que a concorrência e são construídos para resistir a todas as condições. Suportes de elevador multifuncionais (4x4): Nossos versáteis suportes de postes 4x4 são ótimos para casas na árvore, balanços, torres de observação e suportes elevados para persianas.
Age Range (Description) Adult
Age Range (Description) ‎Adult
Batteries Included? ‎No
Batteries Required? ‎No
Brand Elevators
Brand ‎Elevators
Color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 989 ratings 4.8 out of 5 stars
Floor Length ‎8.4 Inches
Included Components ‎Set of 4 E1088 Elevator Brackets
Installation Method Free Standing
Installation Method ‎Free Standing
Is Discontinued By Manufacturer ‎No
Item model number ‎E1088
Item Package Quantity ‎1
Item Weight 24 Pounds
Item Weight ‎24 Pounds
Manufacturer ‎Elevators, LLC
Material Alloy Steel
Material ‎Alloy Steel
Number Of Pieces ‎4
Part Number ‎E1088
Pole Material Type ‎Wood
Product Care Instructions Hand Wash
Product Care Instructions ‎Hand Wash
Product Dimensions 8.4"L x 4"W x 11.7"H
Product Dimensions ‎8.4 x 4 x 11.7 inches
Product Dimensions ‎8.4"L x 4"W x 11.7"H
Recommended Uses For Product Hunting
Recommended Uses For Product ‎Hunting
Size ‎4 x 4
Sport Hunting, Outdoor Lifestyle
Sport ‎Hunting, Outdoor Lifestyle
Style ‎4 X 4
Warranty Description ‎Lifetime Warranty

3.8

12 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
2

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Devin Riles
Solid Construction
These elevator brackets are well made with thick steel. The welds are solid and it looks like these will hold plenty of weight for the deer stand I'm building. The only slight issue is that deep in the pocket where the plates attach to the 4x4 sockets, there is no powder coating and there was minor surface rust on the bare steel. A quick blast of rustoleum in the pocket should prevent and further corrosion. Otherwise, these are awesome.
Scritto da: disappointed
Best stand ever
Easy to install and then erect stand. With cross supports creates a very sturdy structure.
Scritto da: cw4usa
Great Value
Very sturdy construction and made building the new platform for my stand a breeze. When mounting the brackets, take great care in the sides that you mount them on. They will only work one way, properly. Mounted on the wrong sides, the force of the weight of your platform will try to pull the mounting board away from your intended connection...
Scritto da: Strawboss
Good product but has a small and neglible design flaw.
I did a very thorough www search to find the most suitable elevators for my stand. The ones I wanted were those which angled out in two directions ("compound angle") such that both sides of the platform corners got equal support. Some of those I found stated that they were built for the tower legs to be at a 15 degree angle outward from plumb. For my stand with 10' 4x4's I felt 15 degrees would result in an overkill spread between the posts at ground level. Meanwhile the descriptions for other elevators I found didn't state what the post angle was. For this set of elevators, the ones I bought, the Amazon description doesn't provide the post angle however both the manufacturer's website and the Home Depot's website state it's 8 degrees which is plenty adequate. They're also 12 gauge steel whereas some of the other brands of elevators are made of thinner material. To attach the elevators (those I'm reviewing) to your 2x6 the instructions call for carriage bolts to be inserted from the inside, through the wood member, with the nut on the outside. The only negative I found with these elevators is that inside vertical part of the elevator is too high and doesn't allow the carriage bolt head to clear it which is necessary for the bolt head to anchor into the wood. It's a bit of a struggle to work around this design mistake which the manufacturer could easily resolve. See photo below.
Scritto da: The BandMan
Decent
Priced a little high but worked great.
Scritto da: Amazon Customer
Awesome.
Awesome product.
Scritto da: Shepherd
Works great
Although I put them on two by fours with three-quarter inch plywood on the deck, they work great. Very sturdy and the best part is, they are made in the USA. This is going to be a elevated/heated deer tree stand.
Scritto da: boxer
excellent
Heavy-duty steel, easy to install.
Scritto da: Robert Snow
As advertised
These leg brackets are perfect for building a raised deer blind. They are strong and once 4”x4” legs are installed and secured as per the directions, there is no swaying. I would highly recommend
Scritto da: mario g.
Great product!
Awesome product! My elevated blind is all set up and crossbow deer hunting starts next Saturday, here is Quebec! Can't wait to get there.
Scritto da: David B.
excellent product
very sturdy and easy to set up. As advertized
Scritto da: Amazon Customer
good quality
Really good looks really nice

Produtos relacionados

hot
hot
Caçador de Recompensas 12COILDD-BH, Preto
2.6/5

€ 386.11

Caçador de Recompensas 12COILDD-BH, Preto
2.6/5

€ 386.11

hot
Kit alimentador Moultrie Super Pro Magnum
1.4/5

€ 267.29

Kit alimentador Moultrie Super Pro Magnum
1.4/5

€ 267.29

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array