Suporte de parede Leonardo Bike Rack by Delta Cycle – O elegante design vertical do gancho fornece fácil acesso ao armazenamento de bicicletas – Instalação sem complicações – O suporte vertical suporta até 40 lbs de gordura para pneus de bicicleta

Brand:‎Delta Cycle & Home

3.5/5

67.45

Andar de bicicleta como meio de transporte e tranquilidade não deve significar sacrificar seu espaço para acomodar seu equipamento. Com uma pegada vertical que economiza espaço e um design de gancho de bicicleta proprietário, sua bicicleta é armazenada com segurança do chão contra qualquer parede. Ideal para o seu apartamento, casa ou garagem, o suporte de parede para bicicleta individual Leonardo é montado em qualquer suporte de parede com hardware incluído para uma solução fácil de armazenamento de bicicletas. Construído para acomodar qualquer estilo de bicicleta, este suporte de bicicleta suporta uma única bicicleta de até 40 libras com pneus medindo menos de 2,5”. Para bicicletas Fat Tire, selecione o suporte de parede para bicicletas individuais para pneus Fat. Com um design contemporâneo que apresenta um gancho de bicicleta revestido de borracha antiderrapante para proteger o aro do pneu, você pode adicionar elegância E armazenamento a qualquer ambiente. A instalação fácil de descascar e colar da bandeja do porta-pneus permite um posicionamento personalizado, mantendo a parede livre de arranhões e protegendo o aro e o acabamento do pneu. Como líder confiável em armazenamento de bicicletas, mais de 1 milhão de ciclistas confiam em suas bicicletas nos ganchos Leonardo. Projetado e desenvolvido nos EUA com suporte ao cliente baseado nos EUA, nosso objetivo é oferecer uma experiência de cliente A+.

A marca que você confia. Os acessórios de que você precisa: por mais de 30 anos, a Delta é a marca em que você pode confiar com design e engenharia baseados nos EUA. Nossa linha de produtos pequena e concentrada reflete o pensamento cuidadoso e a dedicação investida em cada produto que criamos. Construção de qualidade: este produto é feito de aço revestido a pó durável e uma tampa moldada personalizada. Acabamento elegante: o design moderno deste gancho de prata fica bem em qualquer cômodo ou garagem. Segurança em primeiro lugar: a bandeja de pneus protege a roda traseira e protege sua parede. Armazenamento de bicicleta moderno e limpo: armazene quase todas as bicicletas com o gancho de montagem na parede para bicicleta individual Leonardo Fat Tire da Delta. Compatível com pneus largos, comporta uma bicicleta com largura de aro de até 3,5” e largura de pneu de 5”. Suporta até 50 libras. 11" x 3,5" x 5".
Assembly Required ‎Yes
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎Delta Cycle & Home
Color Fat Tire Bike Hook
Color ‎Fat Tire Bike Hook
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 245 ratings 4.4 out of 5 stars
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Included Components ‎Fat tire rack
Is Discontinued By Manufacturer ‎No
Item model number ‎RS4008C
Item Package Quantity ‎1
Item Weight ‎0.4 Pounds
Item Weight ‎6.4 ounces
Manufacturer ‎Delta Cycle Corp
Material Alloy Steel
Material ‎Alloy Steel
Mounting Type ‎Wall Mount
Number Of Pieces ‎1
Number of Shelves 1
Number of Shelves ‎1
Part Number ‎RS4008C
Product Dimensions 5.5"D x 5.4"W x 4.7"H
Product Dimensions ‎5.4 x 5.5 x 4.7 inches
Product Dimensions ‎5.5"D x 5.4"W x 4.7"H
Room Type ‎Office
Size ‎Fat Tire
Special Feature Durable, Space saving
Special Feature ‎Durable, Space saving
Special Features ‎Durable, Space saving
Style ‎Fat Tire Bike Hook
Usage ‎x

3.5

13 Review
5 Star
66
4 Star
22
3 Star
5
2 Star
2
1 Star
6

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: T. Patton
Lacks Sturdiness
First time I hung bike, the top wall screw snapped in half. Books feels a little too flexible. May be good for light weight street bikes, but a little flimsy for a heavier fat tire mountain bike. Next time I'll probably go with a sturdier one for peace of mind.
Scritto da: Amazon shopper
Hook is great, plastic rear wheel holder is brittle
The plastic piece for the rear wheel cracked a little bit the first time I used it in the cold.
Scritto da: Brandon & Cacia
Good wall mount
This is a pretty good wall mount, easy installation, holds bike well. My only complaint is the crappy adhesive strip on the lower tray and the fact that there isn't a pre-drilled hole on the lower tray. I have the rack installed on a naked stud and every time the rear wall hits the lower tray at an angle other than straight on, it pops the tray off. Finally drilled it out and screwed it to the stud. Much better.
Scritto da: J. Shyloski
Works well with balloon tires on cruiser bike.
Mostly upsides and happy. The red covering is a length of plastic sleeve. It may or may not last, but should be relatively easy to replace if/when it gets chewed up. Clear wall protector for bottom tire is discreet but seems like it could be a deeper trough; doesn't hold tire securely against bumps. Also, self-adhesive will likely to more damage to wall finish on removal; suggest using short screws -- there's not a lot of stress on the part.
Scritto da: Ferrstein
Very well made and sturdy. I use these with mountain bikes as well ...
Very well made and sturdy. I use these with mountain bikes as well as fat bikes. Do make sure you have a solid mounting surface. I used a 2x8 "cleat" on the wall and in my case ran a couple returns to the floor. I only did this because my walls are 100 year old clay tile and a toggle or Tapcon will not hold. Most folks should be able to simply attach the hooks directly into a stud or install a cleat similar to mine to the studs and then mount these. Well worth the effort - these freed up a bunch of space in my basement!
Scritto da: Amazon Customer
Must mount to wall stud.
After reading many reviews of bike racks this one looked to be the most sturdy. It lived up to my expectations and holds my fat tire bike securely to the wall. Due to the nature of how this rack works it's imperative to mount it to a wall stud. Using a drywall anchor will most likely fail over time.
Scritto da: Nate Schwartz
Awesome bike rack
This bike rack is awesome. The fat bike one is honestly better than the original in my opinion. They are super easy to hang but the fat bike one is easier to get your bike on and I prefer the galvanized look. Perfect for hanging bikes and getting them out of the way.
Scritto da: Dylan Meadows
Missing Parts
So I know that when you buy this new you get four screws and four washers. I bought this used and it came with only two screws and no washers. I will have to go by the hardware store after work today to get the extra parts.
Scritto da: CS
Very poor description - great product.
Why this is listed as a "woman's" bike rack I cannot understand. But Amazon seems to have a problem with gender (I bought a "unisex" knife the other day!). I don't know why it is so hard to find a good bike rack, I had ones where the hook part is hinged so you have to lift the hook with one hand while lifting the bike with the other, even those that say they fit MTB tyres don't. I use this for my MTB with 2" tyres, works great.
Scritto da: Iem
Calidad y precio excelentes
La foto de la publicación me hizo dudar un poco la compra pero el tono en que llegó me gustó mucho, por lo que debería decir que la foto no corresponde con el producto y es algo que debería corregirse, en cuanto a materia la parte superior es de metal y parece de buena resistencia y la parte de abajo es de plástico que parece igual muy resistente, me gustó mucho
Scritto da: Guy L
Only fatbike hanger I could find but does the job
This hanger seems like good quality. I gave 4 stars because with my 27.5in wheels and 4.5in wide winter tires it was too thick to hang on the hook, I had to cut about an inch of the hook to be able to install my wheel on it. I also drilled through the plastic thingy for the rear wheel to put a screw because I didn't trust the sticker (not 3M)
Scritto da: Kardnal
Very well built.
What arrived was very well built. (Though different in colour than the images pictures. Much darker metal, and rubber guard on the hook.) The mounting screws were serious hardware. Installation was a snap. Must install it into a stud though. I wouldn’t trust a bike hanging from this with just anchors in drywall.
Scritto da: Hannah Connon
Does indeed hold a fat tire
Can confirm, this rack does indeed hold a fat tire. I have a 2017 Norco Bigfoot with 4.7 or even 4.8 inch tires and it fits fine. Put it up 2 weeks ago and my bike is still secured firmly to the wall. You absolutely have to hang this on studs, do not even attempt drywall. The only reason I took 1 star off was because the rack left a lot of marks on my freshly renovated/painted wall. It is coated in something that leaves scuffs marks just by touching the wall. Might be an issue if you are looking to hang your bike inside your house. Also, the picture of the tray makes it look like it screws into your wall, but it is a peel and stick, fyi.

Produtos relacionados

hot

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array