Prime-Line N 6599 Conjunto do rolo da porta do espelho, 1-1/2 polegada, roda de plástico, rolamentos de esferas, côncavo, moinho

Brand:PRIME-LINE

3.4/5

25.01

DESCRIÇÃO DO PRODUTO Este conjunto de rodízios de porta espelhada é construído em uma carcaça de alumínio extrudado e vem com acabamento em alumínio fresado. A caixa mede 1-3/4 pol. de largura, tem 1/2 pol. de espessura e 3 pol. de altura. Este suporte de caixa também apresenta uma saliência extrudada redonda e é usado pela Monarch Door Company em suas portas com estrutura de alumínio da série “500”. A roda é construída em plástico durável que proporciona um rolamento suave, duradouro e silencioso e possui rolamentos de esferas de aço e uma borda côncava (ranhurada). Este conjunto de rolos de porta de espelho é montado na parte inferior das portas de armário espelhadas deslizantes, é ajustável uma vez instalado e é usado por muitos fabricantes de portas de armário. DO FABRICANTE Este rolo de porta de espelho é construído em nylon e vem afixado a um invólucro de alumínio. Possui um design de montagem inferior ajustável com uma saliência extrudada redonda. Este rolo de estilo se encaixa nas portas de guarda-roupa de moldura de alumínio Monarch Door Co. 500 Series.

Fácil de instalar em menos de 30 minutos com algumas ferramentas simples. Desliza no canal extrudado na porta. Construída com uma roda de plástico com rolamentos de esferas de aço, montada em uma carcaça de alumínio extrudado. Rolo de rolamento de esferas côncavo de 1-1/2 pol. de diâmetro. Caixa de montagem de 1-3/4 pol. x 1/2 pol. x 3 pol. Usado pela Monarch Door Company em portas de armário de espelho deslizante com estrutura de alumínio da série 500.
Assembly Required Yes
Batteries Included? ‎No
Batteries Required? ‎No
Brand PRIME-LINE
Color Mill
Color ‎Mill
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 172 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Mill
Included Components ‎Hardware;Door, Gate & Window Hardware;bi-fold-door-hardware
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎N 6599
Item Package Quantity ‎1
Item Weight 0.11 Pounds
Item Weight ‎1.76 ounces
Manufacturer ‎Prime-Line Products
Material Plastic
Material ‎Plastic
Part Number ‎N 6599
Product Dimensions ‎1.75 x 3.81 x 0.5 inches
Size ‎1-1/2 in.
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3.4

8 Review
5 Star
72
4 Star
11
3 Star
7
2 Star
2
1 Star
8

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Robert
ALMOST fit the door. With a little sanding the closet door with new wheels roll smooth as silk.
30 year old bracket on the door would not accept the new wheel. I suspect the milling is more accurate on the new wheel which is smooth vs the door bracket which has casting ridges. 300 grit silicon carbide sand paper onto the top of the slot of the door bracket solved the problem. Faster if a rasp file is used prior to the sandpaper. Took about 5 minutes of rasping/ sanding (after about 3 hours of experimentation). Closet door with new wheels smooth as silk.
Scritto da: Stephen tibbs
great replacement for old worn out sliders on closet doors
super well sliding door gliders replacements for closet doors. fit well but had to shave small amount off with file to fit.
Scritto da: G. Kan
Better than I thought it would be
Old closet doors were a pain to move. The wheels were damaged and were hard to move. They were simple to replace with a second person helping. Needed someone to help lift the door off the track. Wheels aren’t locked in so make sure to hold on to them to clear tracks. Once off of track the wheels can drop straight down. Slide new ones in and place back onto the tracks. Please NOTE that these are round fittings where it slides into the mount. There is a similar looking one that has a square fitting. Make sure you are getting the right ones. There is a screw on top of the mount attached to the door that will adjust the height of each wheel to ensure the doors can close flushed to the wall.
Scritto da: Rob B.
They Do Not Fit a Monarch Sliding Mirror Door WITHOUT MODIFICATIONS
These looked absolutely identical to the old/original ones I pulled out of my door. The problem is they do not slide onto the door. The casting is off just enough to cause interference between the two. I had to tap out the piece it slides into on the door, place it in a vise and grind down about 1/16" for it to now slide within the mounting piece. Having said all that, what should have been a 5 minute installation took about an hour between taking the doors completely out, laying them on their sides to get the frame track out to grind it down, had they fit correctly, the whole job would have taken 5 minutes... Now, considering they might be scarce elsewhere, once they were installed with the modifications, they work just like new. So, unless you have the tools and time, I would hire someone to install them for you.
Scritto da: P.H.Various
Really tight fit
The wheel spins beautifully. The assembly however is very difficult to install. The size is exactly the same as the receiver. So you have to tap this thing in with a hammer. I can’t speak for anyone but myself, but I really don’t like having to hammer my mirror doors. Just saying it’s a bit nerve-racking. Either way it’s in and they roll really nice.
Scritto da: Dee
Just what I needed....
I was so happy when I found these as my sliding closet doors are a discontinued model. This part fit perfectly. Sliding the doors runs smoothly on the track. This saved me replacement costs of over 700 USD.
Scritto da: edward Biedrzycki
It works
That it worked
Scritto da: GCC
Just What I Needed
My mirrored sliding doors were installed in 1985. I'm so thankful that I checked Amazon and found the exact part needed to replace the original door roller assembly. These worked great and were easy to change out and properly adjust. Now my sliding doors work like a charm!

Produtos relacionados

hot
Nu-Vu 66-1158 Termostato 85-230
0.1/5

€ 336.22

Nu-Vu 66-1158 Termostato 85-230
0.1/5

€ 336.22

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array