CURT 55384 Cablagem de reboque de 4 pinos personalizada do lado do veículo de substituição, preto, 6 x 3 x 9 polegadas

Name: CURT 55384 Cablagem de reboque de 4 pinos personalizada do lado do veículo de substituição, preto, 6 x 3 x 9 polegadas
Brand: CURT
SKU: 612314553846
Price: 88.58 EUR
Availability: InStock

Brand:CURT

3.6/5

€
88.58

CONSTRUÇÃO DURÁVEL. Para uso duradouro e uma conexão confiável, o invólucro do soquete de fiação do veículo de 4 pinos é feito de borracha moldada preta durável que nunca enferruja ou corroe. APERTO FÁCIL. Conectar a fiação e as luzes do trailer é fácil com o design ergonômico desta tomada de veículo. Possui uma aba na parte superior para uma melhor aderência ao conectar em seu trailer ou desconectar. USCAR-ESPECÍFICO. Este chicote de fiação USCAR foi projetado para veículos selecionados com um soquete USCAR padrão, garantindo a instalação mais fácil possível e a conexão de fiação mais confiável. CONECTOR PADRÃO. A fiação de reboque de 4 planos pode ser usada para conectar luzes traseiras de reboque, luzes de freio e indicadores de direção. A fiação de reboque de 4 vias é popular em uma ampla variedade de reboques, adicionando opções de reboque versáteis para o seu veículo. FÁCIL DE INSTALAR. Sem cortes Sem emendas Este chicote de fiação de reboque se encaixa em uma conexão USCAR existente em seu veículo e o equipa com um conector de fiação de reboque padrão de 4 pinos para conectar e rebocar um reboque. NOTA: O veículo já deve estar equipado com USCAR.

Quantia

adicionar ao carrinho Comprar agora

EAN: 612314553846

Categorias Automotivo, Acessórios externos, Towing Products & Winches, Acessórios de engate Acessórios, Fiação,

Brand	CURT
Brand	‎CURT
Customer Reviews	4.6 4.6 out of 5 stars 3,708 ratings 4.6 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 3 x 9 inches
Item model number	‎55384
Item Weight	0.71 Pounds
Item Weight	‎11.3 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎55384
Material	Rubber
Model	‎OE 4-Way Flat Socket
OEM Part Number	‎55384
Product Dimensions	‎6 x 3 x 9 inches

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: WhiZky

Great product

I needed or actually wanted to replace my 18 year old harness. Since I was rewiring the trailer I thought I may as well get the same product I purchased 18 years ago. The old one wasn't bad, I just thought I may as well replace everything from the towing vehicle back to the trailer tail lights just to be safe. Excellent product. I'll probably buy another one in 20 years. Yes, they're that good.

Scritto da: Karl

Plug and play and on the go!

I needed to have an extra 4 pin connection without having to drill or splice any wires and keep the originalsetup, this was the best solution I could get; just plug-and-play and exactly what I needed.

Scritto da: Kingsar

Towing

It fits a 2005 Nissan Armada right connector

Scritto da: PHam

Easy to install

This allowed me to install a backup camera without altering the factory wiring. The wiring in this adapter is heavier duty than the factory wiring. Good product with plug and play installation. The only issue is finding a way to tie wrap the longer pigtail wires out of the way.

Scritto da: Ron

Works great

I used this with the OPT7 on my Tundra so I would not have to modify my OEM wiring. Plug-n-play, worked great.

Scritto da: W. Lewis

Excellent add on

Used this to add a tailgate light bar to my truck. Clean and easy install. Wires are tucked away.

Scritto da: Jason

Fit great

I used it to get an extra plug for rear light bar. Maybe a little bit pricey but I bought an upgraded light bar and wanted it to work right without splicing wires. Still had to run a reverse light wire

Scritto da: Dezon

Excellent

Excellent

Scritto da: mike

Great product if you are using a tailgate light bar

Great product, well made and easy to install.

Scritto da: CoJad

Worth every penny even if you’re experienced in splicing wires

Product arrived next day after order. Very easy and fast to install. Perfect product for someone looking to install any kind of light bar, camera or truck accessory. Completely eliminates the need to cut into your factory wiring harness, additional 4 pin connector let’s you simply plug in a light bar without having to splice into the harness or have the wiring hang out of your trailer connector. The only improvement I would like to see is for the reverse light wire of this harness to be lengthens by a few inches because this is the only wire you need to splice in order to connect the reverse light wiring for a light bar or backup camera. Still fairly easy to do but a long reserve light wire would make this product perfect!

Scritto da: Jeremy Dunn

Great product.

As expected. Fast shipping and quality. Took 5 mins to install and now I have an extra 4 pin connector and length on all pins. Cleans up the bumper too in a 4 pin was in use. Recommend.

Scritto da: David L.

Perfect fit.

Great product. Easy to install.

Scritto da: Norm Hanley

Works perfectly

I bought this harness to hook up a rear light bar. This was really plug and play; exactly what you would expect from Curt. I rated the "sheerness" as a one star because the wires and all other pieces are completely opaque. I'm not sure why Amazon included this rating point but it struck me funny.