Cetro 08580 OEM portátil tanque de combustível marítimo de 6,6 galões para barcos com motor de popa, 21-1/2 polegadas x 14 polegadas x 9 polegadas, vermelho

Brand:Scepter

3.4/5

197.81

Excelente para uso com motores de popa e projetado de acordo com os padrões internacionais, o tanque de combustível marítimo portátil Scepter é fácil de transportar e possui tampa ventilada de 2 vias do Scepter. O tanque de baixa permeabilidade elimina a evaporação do combustível e retém a octanagem por mais tempo. Feito de material estabilizado por UV, o design robusto e resistente a esmagamento apresenta uma construção de polietileno de uma peça sem costura, construída para alimentar suas aventuras marítimas nos próximos anos. Funciona com gasolina e combustíveis misturados com etanol. Já líder global no projeto e fabricação de recipientes portáteis de combustível e água para os mercados marítimo e de consumo, a linha de produtos militares da Scepter é robusta, confiável e construída para durar.

FEITO NO CANADÁ. CONVENIENTE – A combinação de coletor de combustível/medidor visual aceita acessórios de tanque marítimo padrão de 1/4 NPT. CONSTRUÇÃO DURÁVEL - Design resistente a esmagamento feito de HDPE estabilizado por UV, ferrugem e resistente à corrosão para máxima durabilidade. TAMPA VENTILADA DE 2 VIAS – O sistema automático de válvula de entrada de ar permite que o ar entre no tanque durante a operação e a pressão seja liberada acima de 5 PSI. DESIGN COMPACTO - Os pés moldados mantêm o tanque fora do chão para maior ventilação e estabilidade, enquanto o perfil fino facilita o armazenamento sob o assento. FÁCIL DE TRANSPORTAR - O tanque de combustível marítimo portátil com alça superior moldada transporta facilmente da doca para pequenos barcos de pesca, botes e outras pequenas embarcações.
Brand Scepter
Brand ‎Scepter
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 341 ratings 4.4 out of 5 stars
Exterior Machined
Exterior ‎Machined
Fit Type Vehicle Specific Fit
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 21.25 x 14.05 x 9.75 inches
Item model number ‎3004.1539
Item Weight ‎6 pounds
Manufacturer ‎SCEPTER
Manufacturer Part Number ‎08580
Material Polyethylene
Material Polyethylene (PE)
Model ‎GAS TANK OEM CHOICE 6.6 GA L/E
OEM Part Number ‎3-8580-SCEPTER
Product Dimensions ‎21.25 x 14.05 x 9.75 inches

3.4

8 Review
5 Star
74
4 Star
11
3 Star
3
2 Star
2
1 Star
10

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Ovidio carrillo
comprar otra tapa
Hola el producto esta muy bueno solo queria preguntar como puedo hacer para comprar otra tapa
Scritto da: CaptainMal
Made fine but that gas cap is a bummer.
Gave up on venting the gas cap. One of those stupid EPA caps, it just would not vent. Had to spend $16 and buy an old fashioned cap with a regular screw vent top. You have to take out the fuel gauge fitting to screw in an appropriate quick disconnect. Works fine but noticed that the fuel gauge broke. No biggie for me as the tank is under a rear deck and you cannot see the gauge anyhow. Maybe I take it apart and check. Maybe not.
Scritto da: Debra / John
well made
Great product
Scritto da: m
Good for cost, nice size.
Leaks fuel through line if left pressurized.
Scritto da: Matthew Murphy
Good product, well built- but expensive like all the rest.
All marine fuel tanks are entirely too expensive for what they are imo. That being said, this tank is well made and serves its purpose. It fit a small area in my boat that other tanks wouldn’t. For that purpose, I think it exceeds expectations. It also has a nice fuel gauge. Don’t let quality stop you from buying this tank. It’s very well made and every bit as good as the others. It’s a niche market for these small tanks, so if you’re looking for this one you probably need this size. Take the leap!
Scritto da: Jeremy
Nice little tank- depressurize prior to connecting
Very handy little gas can. Had a bulky 6 gal but it was always in the way. Th instructions explain how to depressurize the tank- LISTEN TO THEM! Not only when opening the tank but also before connecting either end of the fuel line. My only reason for giving 4 stars instead of five is that the intake tube inside the tank does not seem to be able to empty the tank. I Ran out of gas with about a half gallon left as the filter/intake is "up the tube". That having been said I recognize the benefit of this as well.
Scritto da: Robert Terrell
Easier and better than 6gal metal.
No rust , lighter to carry
Scritto da: jjrbus
Should be ashamed of themselves!
In order to install the Yamaha quick connect the fuel gauge/pickup housing needs to be removed. If it was a 1/16th of an inch taller would not have to remove it! Just genius, brilliant. So ok no big deal, I have a couple hundred screwdrivers and bits and the right size star driver. After installing the quick connect the screw is 1/3 under the connector. Meaning the driver has to go in at an angle which is the absolute wrong way to drive a screw. If you have to remove this a few times rotate the screws as I am sure they are not hardened and the heads will quickly strip. What is the matter with these people, If this was not the dimensions I needed I would send it back!!! If I have to drill a hole to vent IT IS GOING BACK!

Produtos relacionados

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array