BOSCH OSP114CC 1-1/4 pol. Lâmina de imersão extrema de metal duro curvado-tec oscilante StarlockPlus multiferramenta 1-1/4 pol. Lâmina de corte em imersão resistente Curved-Tec StarlockPlus 1 peça

Name: BOSCH OSP114CC 1-1/4 pol. Lâmina de imersão extrema de metal duro curvado-tec oscilante StarlockPlus multiferramenta 1-1/4 pol. Lâmina de corte em imersão resistente Curved-Tec StarlockPlus 1 peça
Brand: BOSCH
SKU: 0000346627473
Price: 42.89 EUR
Availability: InStock

Brand:BOSCH

3.8/5

€
42.89

A lâmina de imersão extrema em carboneto curvo-tec da BOSCH oferece desempenho profissional e duradouro no corte de metal (pregos e grampos), madeira com pregos, gesso cartonado, PVC e outros materiais. O design curvo-tec apresenta uma borda arredondada para controle preciso durante cortes de imersão. Os dentes de carboneto fornecem vida útil 30 vezes maior em comparação com as lâminas de mergulho bimetálicas padrão. O corpo cônico reforçado reduz as vibrações e a flexão da lâmina, proporcionando menos emperramento e cortes mais suaves. Os acessórios Star Lock® fornecem um aperto de lâmina tridimensional para proporcionar maior transferência de torque, vibração reduzida e desempenho profissional. Eles apresentam uma interface de troca rápida sem toque de três segundos com multiferramentas Star lock®. Os acessórios Star Lock plus® são projetados para serem compatíveis exclusivamente com as multiferramentas Star lock plus® e star lock Max® devido aos requisitos de energia necessários para acionar as lâminas. Eles oferecem o mais alto desempenho e fornecem a mais ampla gama de acessórios para várias ferramentas disponíveis. Interface codificada por cores e lâmina gravada a laser projetada para permitir que o usuário identifique rapidamente a lâmina certa. Lâmina de fabricação suíça de nível profissional resistente Fabricada com materiais premium e engenharia inovadora.

Quantia

adicionar ao carrinho Comprar agora

EAN: 0000346627473

Categorias Ferramentas e Melhorias Domésticas, Ferramentas elétricas e manuais, Peças e acessórios para ferramentas elétricas, Acessórios para ferramentas oscilantes, Lâminas,

Lâmina profissional resistente Starlockplus – lida com aplicações pesadas com força e precisão; projetado para multi-ferramentas StarlockPlus e StarlockMax devido aos requisitos de energia. Transferência de torque – apresenta um ajuste tridimensional projetado para alta transferência de torque, vibração reduzida e melhor desempenho. Corpo cônico reforçado – reduz as vibrações e a flexão da lâmina, proporcionando menos emperramento e cortes mais suaves. Vida útil estendida – inclui dentes de carboneto, proporcionando vida útil 30 vezes maior em comparação com as lâminas bimetálicas padrão. Design extremo de carboneto curvo-tec – apresenta uma borda arredondada com dentes de carboneto de longa duração para cortar madeira com pregos, pregos e grampos, drywall, PVC, ladrilhos de cerâmica e muito mais.

Brand	BOSCH
Color	Black
Compatible Material	Wood, Ceramic, Metal
Country of Origin	Switzerland
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	4.28 x 1.28 x 0.03 inches
Item model number	OSP114CC
Manufacturer	Bosch
Material	Pvc,Wood,Ceramic
Number of Pieces	1
Product Dimensions	4.28 x 1.28 x 0.03 inches; 1.41 Ounces
Style	Plunge Cut Blade Heavy-Duty Curved-Tec

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Jasper

Last a lot longer than the no name cheapies

After using a bunch of cheap no name blades in my oscillating saw...I found these. Purchased the 3 pack of these Bosch blades.....and I will say, they last a LOT longer than anything else I've used. They are pricey for sure...but at least I can cut through quite a number of nail/screws before they show much wear. With the old "no name" cheapies....sometimes I'd have to change the blade every time I cut through one single nail or screw.

Scritto da: Rocket man

Really good

So far they’re performing pretty well they’re lasting longer than the generic blades that I bought so I will continue to buy these

Scritto da: walter bastian

Awesome price

I go through blades. Ten packs are way cheaper.

Scritto da: Skull cap afficionado

These are the best in a large field

I am a carpenter and have used just about every brand of oscillating blade. They are an expensive but essential part of my daily life. These Bosch carbide tipped are far superior to any other blade purporting to cut metal and nails. Yes, they are comparably expensive, but are exponentially cheaper in the long run because they last so much longer, I'm talking 5-10x longer with superior performance from jump. Keep in mind these aren't really designed to cut wood (they do an adequate job though), use the appropriate blade for that and switch back and forth depending on whether there is a threat of encountering metal/nails, thereby extending the life of your wood blade as well.

Scritto da: rosewoodsteel

Cut Everything I needed it to Cut

I used this on my Bosch multi-tool while building my shed. It cut through wood, nails and anything I needed to have cut that a traditional tool couldn't handle. It wasn't cheap, but it worked great and didn't let me down.

Scritto da: My Opinion

Cuts slowly

Was trying to use to cut 1/8" by 1" soft steel strip. The Oscillating Tool was cutting but very slowly. Ended up switching to a hack saw. Not sure if this is a tool issue where the tool is not designed for this kind of cutting or blade not sharp enough. The blade is somewhat thicker that hack saw which also affected the speed. I do not know if Bosh makes carbide blades that are not as thick - the same thickness as their bi-metal blades. If I had to make this cut in a close space where I could not use the hack saw I would be able to finish cutting with the Oscillating Tool, just need take my time.

Scritto da: Karen W

Great blades

Needed to cut off 23 concrete blue screws from my patio floor that had broken off when removing my screen enclosure. One blade did the job. Though the teeth are pretty much worn down, there are still teeth and could probably cut a few more. Blue screws are hard steel and not soft like common nails. These blades should go through nails with ease. highly recommend.

Scritto da: lynda slater

Tough as nails, litterally!

I bought these to cut through stainless steel shower glass tracks that I went to frameless on. The silicone wouldn't allow me to remove the glass panel so I had to cut the track apart. These, actually one of them, let me cut 5 feet of SS track and didn't even wear the cutting edge at all. They're even tougher than they claim.

Scritto da: Robert Benson

Good

Its a tool that works

Scritto da: Paul smith

Very expensive and wear out very very fast

I have tried 2 of these blades to cut through rusted nails and they only cut 6 each for a price of £19 each. They are very expensive for what they do. Unfortunately because they are star lock fittings you cannot buy cheaper ones from different suppliers as that would be the best route

Scritto da: Vinicius Fracari

Excelente precisão e corte

As lâminas da Bosch são tão boas quanto às da Makita. Ambas cortam metal e outros materiais com precisão e excelente acabamento. Não faço distinção entre essas duas marcas. Vale a que estiver com o preço mais em conta. Ainda há boas opções também da DeWalt e Dremel (esta última também é da Bosch atualmente). Só não me arrisco a comprar lâminas de multicortadora de marcas genéricas, pois cegam rapidamente e não cortam com precisão.

Scritto da: Steven Woodward

Better value in use than Bi-Metal blades

I am cutting plaster. Not drywall, but real old style plaster that is filled with small stones. Bi-Metal blades worked but the teeth wear off very quickly. The teeth also wear off these Carbide blades but they last a lot longer. They are not lasting 30X as long as claimed on package, but are definitely lasting 3X as longer which makes them lower cost in use than Bi-Metal, and the work goes faster when I don't have to change the blade every 5 minutes. I did try a diamond disk blade in the Multitool but it didn't cut well.

Scritto da: Robert

Great blades!

While I still think these blades are overly expensive, buying them in a pack of 10 definitely helps and they do last a long time depending on what you're cutting. I had to notch some 100 year old fir 2x6s and the blade did the job though that's also a testament to the tool itself.