Adaptador de fonte de alimentação HitLights 12V 2A, listado pela UL, transformador de 120V CA para 12V CC, carregador de parede de 12 volts e 2 A para fitas de LED e outros dispositivos de baixa tensão 12V 24W listado pela UL

Name: Adaptador de fonte de alimentação HitLights 12V 2A, listado pela UL, transformador de 120V CA para 12V CC, carregador de parede de 12 volts e 2 A para fitas de LED e outros dispositivos de baixa tensão 12V 24W listado pela UL
Brand: HitLights
SKU: 0609788536819
Price: 38.13 EUR
Availability: InStock

Brand:HitLights

3.5/5

€
38.13

DESCRIÇÃO DO PRODUTO Nossas fontes de alimentação de 12V DC listadas em UL fornecem a energia que você precisa para iluminar suas fitas de LED flexíveis ou outros dispositivos de baixa tensão, convertendo sua energia de 110-240V AC em 12 volts DC em que as fitas de LED funcionam. Eles estão disponíveis em várias classificações de potência, de 15 Watts a 150 Watts e em vários estilos, desde modelos plug and play compactos até unidades maiores capazes de alimentar vários rolos de tiras. Esses adaptadores/transformadores premium são listados pela UL e vêm com uma garantia HitLights de 2 anos. Fonte de alimentação de 24 watts, Instruções listadas em UL:- Conecte o cabo CA na tomada de parede- Conecte o plugue de saída CC ao plugue de entrada CC em sua faixa de luz LED, controlador ou dimmer Especificações:- Tensão de entrada: 110 V-240 V CA - (plugue direto na parede - padrão norte-americano NEMA 1)- Potência de saída: 12V DC / 24 Watts (2 Amps / 2a) - Cabo de saída de quatro pés com conector DC de 5,5 x 2,1 mm- Dimensões: 86 x 48 x 33 mm (3-3/8 x 1-7/8 x 1-5/16 polegadas)- Certificações: Listado UL- Número da peça: PWR-12V-024-30-U / TGC24-120200-05 INFORMAÇÕES DE CONTATO DO FABRICANTE Feito por HITlights: Para perguntas sobre o produto ou uso do produto, ligue para (855) 768-4135 para entrar em contato com o fabricante.

Quantia

adicionar ao carrinho Comprar agora

EAN: 0609788536819

Categorias Ferramentas e Melhorias Domésticas, Iluminação e ventiladores de teto, Iluminação Acessórios, Transformadores de baixa voltagem,

DESTAQUES QUALIDADE UL-LISTED. Apoiado por uma garantia de dois anos da HitLights para tranquilidade. Entre em contato com nossa equipe de atendimento ao cliente baseada nos EUA a qualquer momento para solução de problemas e substituição sem complicações ou para qualquer dúvida sobre compra ou instalação. CLASSIFICADO PARA 24 WATTS / 2A - Potência suficiente para executar um rolo de dezesseis pés de 300 LED 3528 faixa de LED. Regulável com dimmers PWM de cor única de 12 volts e compatível com controladores RGB. USE EM QUALQUER LUGAR - Ótimo para uma variedade de usos internos/interiores, incluindo iluminação sob armários em cozinhas, iluminação de realce ambiente em quartos, iluminando toekicks em banheiros ou adicionando iluminação de fundo para exibir decorações ou estantes de livros. CONECTA-SE DIRETAMENTE À SUA TOMADA DE PAREDE, sem fiação, sem solda, sem necessidade de eletricista ou experiência elétrica. Inclui cabo de saída com uma ponta positiva padrão de 5,5 x 2,1 mm DC para conectar ao seu controlador de faixa ou dimmer. SAÍDA CC DE 12 VOLTS ADEQUADA PARA LUZES DE LUZ DE LED e outros dispositivos de baixa tensão, como equipamentos de áudio e vídeo de câmeras de segurança e muito mais. Ideal para instalações de LED em salas de estar, prateleiras, armários iluminados e muito mais.

Brand	HitLights
Color	Black
Compatible Devices	Cameras
Compatible Phone Models	Cameras
Connector Type	Plug in
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
Included Components	24W Power Adapter
Input Voltage	120 Volts
Input Voltage	120 Volts (AC)
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	12V 24W UL Listed
Manufacturer	HitLights
Mounting Type	Plug in
Number of Items	1
Product Dimensions	3.5 x 2.5 x 1.5 inches; 4.97 Ounces
Wattage	24 watts

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Amazon Customer

Replacement cord

After the cat chewed up the cord for both lamps I thought I’d have to trash the lamps. This cord replaced what we had and is also thicker than the original lamp cords. Love it. Now we can use our lamps again

Scritto da: JASON

Delay

I got these to replace 1amp oem versions for under cabinet led lights. These take a full 2 seconds before the lights come on. Very weird. My home automations aren’t very useful if I’m waiting for them to work.

Scritto da: NuclearCryptoHardwareGeek

It's OK to switch the OUTPUT

Do you hate how dark it is inside your hall closet? I did, and I solved the problem by installing a Hitlights LS3528_WW_WP warm white LED strip all around the inside of the door frame, with this "transformer" plugged into the handy duplex outlet provided in the closet for the doorbell. (For technical folk: I put "transformer" in quotes because it's not really a transformer -- it's a universal-input, switching-type AC-DC power supply.) Yes, it does get warmer than I'd like in continuous operation, but I intended to use a door switch to turn the lights on only for the brief periods when the closet door is open. For safety and code-compliance reasons, I preferred not to switch the AC power to the transformer, so I had to evaluate the behavior of the transformer with the door switch in series with the low-voltage output. I plugged it into my Kill-a-Watt (get one, you'll love it) and was pleased to discover that with the output disconnected the transformer draws essentially zero power, so obviously it stays dead cool. The output voltage remained stable as I switched the LEDs on and off, and I concluded that switching the output was practical. I used an automotive-grade microswitch (similar to asin B0029N2S88) because of its high current rating at low voltage. I expect that the lower-cost item identified by another reviewer(asin B007TGO3HO) would behave similarly, but I have not tested it. A suggestion to Hitlights: Market a packaged adhesive-mount door switch, with matching barrel connectors, for cabinets, closets, safes, etc.!

Scritto da: Cursh

Slow start up

Takes about 3 seconds longer to turn on than my other kitchen LED strip transformer.

Scritto da: Raymond W.

Good build quality, No coil whine, UL Listed (Double checked myself), Doesn't get unbearably hot.

Product purchased: Hitlights 60w 12V 5A Power Transformer Something to note beforehand. I have been buying other power transformers from other sellers here on amazon, All of them were not UL listed. Until I almost had a fire from the last transformer I had bought from a "shall not be named" seller / manufacturer who's product would get very very hot during normal use etc. Well this Hitlights transformer hasn't even gotten CLOSE to hot. At most it's been slightly more than room temperature. ZERO coil whine, Which is getting harder to find these days - Trust me I've bought enough of these things. I knew from the moment I picked it up that it was better quality simply from the weight of the device alone. Significantly heavier than the other "shant be named" brand but not a nuisance. TL;DR: Good build quality, No coil whine, UL Listed (Double checked myself), Doesn't get unbearably hot. Will post back if this unit ever has any issues as well as how the seller handles it. Might have to crack this baby open just to view its internals to compare it to the other one I've still got lying around. Though it'd be a shame to ruin the shell. :)

Scritto da: Michael Marburger

Doesn't work with Dimmer

This Driver doesn't work with Dimmer switches. The details are wrong. I know I'm the Electrician who installed this one for a Customer. You have to have a driver that has dimming compatibility or is doesn't work.

Scritto da: Amazon Customer

Having been in electronics all my life nothing good ever comes from a power supply supplying 4

Replaced the original power supply (12V @ 5A) for my under cabinet LED lights. At maximum brightness the current draw was around 4.8 amps. Having been in electronics all my life nothing good ever comes from a power supply supplying 4.8 amps from a 5 amp "rated" power supply. That original one always ran hot and was electrically noisy (I am a licensed amateur radio operator). When the old one failed I took the case off to see "under the hood". I have not seen such a poorly assembled unit in a long time. Board traces cut and parts spliced suspended by their leads. Overheating evident on the circuit board. Now to be fair I have not taken this unit apart but it is rated at 8 amps and so runs much cooler and is electrically quieter. So for now I would give this a thumbs up and to remind people not to load your power supply to the max and expect long life.

Scritto da: Tom Servo

Power adapter with no LED, very short cords

Since Amazon groups all reviews together I'm stating that I reviewed the 60W 12V DC power adapter. The model # on the one I bought was JY60-120-500. The main benefit is that the adapter is UL listed so hopefully it wouldn't burn your house down. If the UL file number on the label can be trusted the manufacturer is DONGGUAN JIAYI ELETRIC CO LTD. The label ratings are: OUTPUT 12VDC @ 5A, INPUT 100-240VAC 1.1A. By the way, it is perfectly acceptable to power a smaller rated device with this 5 amp adapter. That is, if you have a 2 amp device it will work fine when powered with a 5 amp adapter. However the reverse is not OK (powering a 5 amp device from a 2 amp adapter!). I like to overspec adapters so they have some extra margin - you wouldn't really want to power a 5 amp device from a 5 amp adapter. The business end of the adapter is a 5.5mm (Outer diameter) x 2.1mm (Inner diameter) plug, center pin positive. THE GOOD: + Hopefully this is indeed a UL listed adapter and not a non-UL adapter with a fake label (you never know). + The power input cord is a 2-prong cord. THE BAD: - Both the input & output power cords are too short! Each one is a miserly 2 feet in length which is very short. - There is no power LED so you can visually see if the adapter is powered. OVERALL, it is overpriced especially considering the cord length and lack of power LED. If I find a better UL-listed adapter I will update this (if you find one before I do leave a comment, especially if you find one with long cords). I hope you have found this review helpful.

Scritto da: Gilles Fortin

Five Stars

Excellent produit.

Scritto da: VanMan

Good value

It does the job. Very affordable. Not sure how long it’ll Las. My old one lasted about 14 months

Scritto da: Kate

Would Recommend

It works, seems to run cool; drives the lights without any flickering or dimming.

Scritto da: YokeLux

Resistente y duradero.

Ya llevo usándolo como un año y me a funcionado sin problemas, lo utilizo para mi recámara.

Scritto da: Colin F.

Great electric converter

This is a great converter that I have used for some LED strip lighting under my kitchen cabinets, I needed a much lower power supply as the limit is smaller the LED lights so this was perfect for the job. I like that it does not overheat. Well made and good quality!