Abrasivos Sungold 30516 óxido de alumínio 80 rolos de grão para lixadeiras de tambor, 3 de largura por 35 pés

Name: Abrasivos Sungold 30516 óxido de alumínio 80 rolos de grão para lixadeiras de tambor, 3 de largura por 35 pés
Brand: Sungold Abrasives
SKU: 0756343305165
Price: 72.57 EUR
Availability: InStock

Brand:Sungold Abrasives

3.2/5

€
72.57

A fixação das porcas na haste roscada pode ser difícil devido ao espaço confinado e às obstruções ao redor da haste. O movimento lateral é limitado. Em longas seções de haste roscada, os aparafusadores de porca tradicionais se abaixam para que você só consiga colocar a porca até certo ponto na haste. A Chave de Porcas Reforçada da Klein apresenta um eixo completamente oco com cabo para permitir a cravação de porcas em comprimentos de parafuso ilimitados. A assistência da chave fornece maior torque enquanto as pontas magnéticas agarram qualquer porca apropriadamente.

Quantia

adicionar ao carrinho Comprar agora

EAN: 0756343305165

Categorias Ferramentas elétricas e manuais, Peças e acessórios para ferramentas elétricas, Peças e acessórios para ferramentas elétricas de acabamento, Peças e acessórios para lixadeiras elétricas, Folhas de lixa,

Pode ser usado para qualquer aplicação onde o corte no tamanho é necessário. Use a tira na máquina como modelo para cortar a nova tira. Pode fazer 4 tiras para um tambor de 16, como o Jet16-32. Os óxidos de alumínio de peso X premium cortam rapidamente e resistem às aplicações de lixamento mais exigentes. Para uso com lixadeiras de tambor para economizar dinheiro cortando suas próprias tiras.

Backing Type	Paper
Backing Type	‎Paper
Batteries Required?	‎No
Brand	Sungold Abrasives
Brand	‎Sungold Abrasives
Color	Gold
Color	‎Gold
Compatible Material	‎Wood, Metal, Stone
Customer Reviews	4.2 4.2 out of 5 stars 175 ratings 4.2 out of 5 stars
Grit Number	‎80
Grit Type	‎Medium
Included Components	‎Abrasives Roll
Item model number	‎30516
Item Package Quantity	‎1
Item Weight	‎0.01 ounces
Manufacturer	‎Sungold Abrasives
Material	‎Aluminum Oxide
Package Dimensions	‎6.73 x 6.54 x 3.54 inches
Part Number	‎30516
Product Dimensions	420"L x 3"W
Product Dimensions	‎420"L x 3"W
Size	80 Grit
Size	‎80 Grit
Unit Count	‎35.0 Foot

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Richard

Great for a drum sander

Drum sanders exist in a somewhat obscure niche of woodworking - higher end than a lot of home shops have use/space for and to low end for a pro shop that would otherwise use a wide belt sander. Not to mention that there are few definitive sources for how to cut a proper angle/taper on an abrasive so it properly fits a drum sander. So lots of folks who own drum sanders stick with buying overpriced products with pre-cut tapers and pre-determined lengths specified for their model of drum sander. Once you figure out the math and technique, however, the world is yours for buying abrasives in bulk at much lower cost than the manufacturer of your drum sander and its distributors would sell them for because you can buy any width you want, allowing you to prioritize price rather than being dependent on using an exist wrap as a template. That is where getting the math right is crucial because I purchased this thinking it would give me 4 wraps for my 18-36 Delta 31-250 drum sander, but I was wrong and I can only get 3 with a ton left over (but not enough for a 4th wrap). That is not a knock on this product, because it was entirely my fault. Given my experience I would trust the product description that says you could get 4 wraps for a 16-32 drum sander, but I cannot verify it. So here is the math for determining the length you will need for a single wrap of your drum sander drum: ((Circumference of the drum * length of drum) / width of abrasive) + circumference of the drum In my case that works out to being 110.25 inches per wrap. So I needed to buy one step up from this (38 feet) to get 4 wraps, but again, that is entirely my fault. I’ll leave it to you to go find a video or write up about how to cut the tapers properly, but I don’t trust the formulas used by most places since everything I read forgot to add the last “circumference of the drum” and therefore bought the wrong product.

Scritto da: robert d.

Roll was short ~ 1 foot.

Roll was short ~ 1 foot which limited number of segment lengths achievable for drum sander thus wasting paper and value.

Scritto da: Customer Review

Very aggressive

Installed on grizzly drum sander and so far I’m pleased by the amount of wood it takes off

Scritto da: Amazon Customer

Easy to work.

I used this on my 18” finish sander from Grizzly. Holds up well does not clog up like cheap sandpaper.

Scritto da: Frank Switalski

Not durable at all.

Upon second use paper ripped on relatively small passes. Would be a one if not for the price.

Scritto da: M Krebs

good sandpaper

Bought this for my Jet drum sander to save money. Turns out it's also vastly superior to the precut junk that Jet sells. Cuts well, doesn't clog up so bad.

Scritto da: dmann

Works for my Preformax drum sander

The price is good and quality is fine. I will be buying more as needed.

Scritto da: Dwayne Brown

Not very durable.

Doesn't last as long as other brands I've used.