uxcell 34mm x 34mm x 3mm L Shape Mobiliário Ângulo Almofada De Borracha Pé Protetor Da Perna 8PCS

Brand:Uxcell

3.5/5

26.60

DESCRIÇÃO DO PRODUTO Quando uma aparência acabada é importante, a orientação do grão plano dos plugues planos de madeira permitirá que você combine o grão e disfarce o orifício indesejado do parafuso, se você selecionar o padrão e a cor do grão com cuidado. Esses tampões também evitam o efeito de escurecimento experimentado ao terminar os tampões de grão final. DO FABRICANTE Quando uma aparência acabada é importante, a orientação do grão plano dos plugues planos de madeira permitirá que você combine o grão e disfarce o orifício indesejado do parafuso, se você selecionar o padrão e a cor do grão com cuidado. Esses tampões também evitam o efeito de escurecimento experimentado ao terminar os tampões de grão final.

Tamanho total: 40 mm x 40 mm x 30 mm / 1,6 x 1,6 x 1,2 (C*L*A). Aplique ao tamanho do ferro angular 34 mm x 34 mm x 3 mm / 1,34 x 1,34 x0,12 (C*L*T). Cor preta; Adequado para espessura: 2,5 mm-4 mm. Nome do produto: Tampa do pé da mobília; Material: Borracha. Peso Líquido: 145g; Conteúdo do pacote: 8PCS x capa de pé de móveis.
Brand Uxcell
Color Black
Item model number a16092900ux0118
Manufacturer uxcell
Material Rubber
Product Dimensions 1.57 x 1.57 x 1.18 inches; 5.11 Ounces
Product Dimensions 1.57"L x 1.57"W x 1.18"Th
Shape L-Shape

3.5

8 Review
5 Star
65
4 Star
20
3 Star
8
2 Star
4
1 Star
4

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Jamie Montalvo
Good quality
Although this purchase was returned. The quality is very good. Rubber material would help not get scratched by the corners of a frame. It’s just too bad it was not the right size and that was my fault.
Scritto da: Mark
They fit a Muscle Rack - just not snugly.
I bought these for use on three 48"W x 18"D x 72"H Muscle Rack brand shelving units for a garage. They are a perfect fit horizontally, but the gap that the bars will fit into isn't snug enough for them to stay on. So, if you lift or tilt the rack, these rubber feet will fall right off as they're simply too loose. The only way to fix this is perhaps filling them with shims. Other than this, they're a good quality rubber. It's just a shame that they're made to be too loose.
Scritto da: sun_shines
Protects my basement floor
The rubber pads protect my concrete basement floor from the metal legs of my shelving unit.
Scritto da: Tracy B. Teagarden
Nice touch, worked just like I had in mind
Scrap angle iron is everywhere and I make things out of it all the time. When dogs get old in my household I start building things for them and I wanted a reliable way to prevent marring the tile floor with the food bowl stand I was making, I stuck these to the angle with E6000, and it turned out better than anything I could have bought.
Scritto da: K. Jamison
Slip right from under bed
This L- shaped slip protectors may work under some other furniture. They didn't work under this fold up 6leg bed frame.
Scritto da: Shelly Winter
Nice fit, easy to put on.
Used these on the feet of Muscle Rack. Works great between the metal rack & our concrete floor.
Scritto da: Hesh One
Does Its Job Well
The little rubber feet have one job and they fit on the bottom of the industrial rack to keep the rack from damaging the floor. So far, so good. They also keep the rack from sliding which I didn't consider but appreciate.
Scritto da: Poc Network // Tech
They are ok for simple needs, but...
Although they do seem to slide onto the matched shelving ends/feet quite easily, allowing to protect them from scratching the surface the shelves are built upon, they do slide off just as easily. Making these a bit of a gimmick more so than a reliable solution. They don't feel like they will last forever either. Put enough weight on those shelves and it will likely slide/cut right through the rubber. If you slide the shelves on the ground, you will likely tear these apart. If you lift of a side of the shelves off the ground, the feet will almost always fall right off, making it a multi-person task if the shelves have anything on them. So although it is a nice idea, I believe it has failed. Maybe a more durable solution that can slide onto the ends and bolt through the nearest hole to hold them on, sure. But these don't quite make the cut. It was worth a try. **If you have found our review helpful, please vote it as helpful below so I know. This helps me provide quality feedback in the future.

Produtos relacionados

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array