Sensor de teto Enerlites MPC-52V PIR, sensor de ocupação de teto, sensor de luz de teto, sensor de ocupação, campo de visão de 360 ​​graus de grau comercial, 800 pés quadrados. Cobertura Ft, 120-277VAC, Branco

Brand:ENERLITES

3.2/5

69.82

Sensor de ocupação infravermelho passivo de montagem no teto de 360 ​​graus de grau comercial com detecção de movimento. O interruptor do sensor de teto liga/desliga automaticamente as luzes quando o movimento é detectado. Economize dinheiro em contas de energia instalando Enerlites MPC-52V, pois o tempo de instalação é reduzido de 45 minutos para 10 minutos. Nenhuma caixa de teto é necessária para este produto. Inclui duas lentes gratuitas, incluindo uma para alcance mais próximo que é mais sensível ao movimento e uma para alcance mais longo com menos sensibilidade. Para instalar esta luz de teto com sensor de ocupação, simplesmente faça um furo no teto com sua chave de fenda, insira a placa traseira no orifício, passe os fios e conecte. A luminária de teto é ideal para uso comercial ou comercial para fins de conveniência, eficiência energética, segurança e vigilância. Personalização: • Atraso de tempo ajustável: 15 seg. - 30 minutos. • Ajuste de sensibilidade: 50% / 100% Especificações: • Lente Fresnel de 360° multinível para detecção de ocupação superior • Cobertura: campo de visão de 360°; 800 pés quadrados de cobertura • Temperatura operacional: 32° a 131°F (0° a 55°C) • Incandescente 800W @ 120VAC, 60 HZ • Fluorescente 800VA 277VAC, 60 Hz • Motor: 1/4 HP, 120VAC,60 HZ • Designação do fio: Quente, Neutro, Carga • Tecnologia infravermelha passiva, interruptor do sensor de movimento PIR • Controla iluminação incandescente, CFL e LED. • Listado pela UL

A montagem no teto do sensor de ocupação é listada pela UL, incandescente: 400W @120VAC; Fluorescente: 800VA @120VAC, 1200VA @277VAC; Motor: 1/4 HP @120VAC. Temperatura de operação (32 – 131°F), nenhuma caixa de teto é necessária. Lentes Fresnel de vários níveis: o sensor de teto inclui duas lentes intercambiáveis ​​para diferentes níveis de sensibilidade. Personalize para obter melhores resultados. Campo de visão completo de 360° Lente Fresnel cobrindo até 800 pés quadrados. Projetado para altura de teto de cerca de 8-10 pés. Grau comercial, ideal para empresas e propriedades comerciais. O sensor de movimento do teto pode ser conectado diretamente à luminária ou ao teto para facilitar a instalação. Basta fazer um furo no teto e passar a fiação, reduzindo o tempo de instalação em 30 minutos. O sensor de ocupação montado no teto usa a tecnologia de infravermelho passivo (pir) para acender as luzes automaticamente.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ENERLITES
Brand ‎ENERLITES
Certification ‎UL
Color White
Color ‎White
Customer Reviews 4.2 4.2 out of 5 stars 76 ratings 4.2 out of 5 stars
Included Components ‎MPC-52V
Is Discontinued By Manufacturer ‎No
Item model number ‎MPC-52V
Item Package Quantity ‎1
Item Weight 0.01 Ounces
Item Weight ‎0.01 Ounces
Manufacturer ‎Top Greener Inc
Maximum Range 10 Feet
Maximum Range ‎10 Feet
Mounting Type ‎Ceiling Mount
Part Number ‎MPC-52V
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎5.1 x 4.3 x 4.4 inches
Switch Style ‎Temperature Switch
Wattage ‎400 watts

3.2

9 Review
5 Star
58
4 Star
23
3 Star
7
2 Star
3
1 Star
10

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Circle C
Great Instructions
What impressed me the most was the completeness of the instructions and each wire was clearly marked in layman's terms. I also like that you don't have cut a 4" hole to install it. The unit has three main components. The base, the sensor and electronics, and the cover. I plan on ordering another one for my office which has the wall switch inconveniently placed behind one of the French doors making a switch mounted sensor unusable.
Scritto da: Casual Reviewer
Watch out for the lenses in the box
I installed it in a room with an 8ft ceiling and I had to walk almost directly below it for it to work. UPDATE after a couple hours of research.... Frustrated at the prospect of returning a device I just bought and installed, I began reading about passive infrared technology on my phone in the dark room I was trying to automatically light up. In my research I found an article mentioning how a fresnel lens (the jewel shaped lens on the cover) helps with the sensitivity of the devise because it divides the field of view into zones that the detector can monitor. I then remembered seeing when I unpacked the box, a spare lens inside and thought it odd for them so supply one. To try my luck, I took the lens that was mounted on the cover and compared it to the spare one and to my amazement saw that the interior face of the spare lens was much more textured. To try my luck I swapped them out and all my problems went away. The instructions do not make any mention of this so I am not sure if they indeed supply lenses with two sensitivities or whether one was defective. I give it 5 stars for working as advertised minus 1 for either poor documentation or providing defective lenses.
Scritto da: Robert L Klawuhn
Easy to install and works well.
It seems to be very sensitive. Maybe too much sensitivity for a small porch, even at the low setting. But it works great and was simple to install.
Scritto da: A. Adams
Failed in less than one week of actual use
Update: Failed just one day after my return window closed. At around 2AM in the morning it started turning on and off repeatedly without any trigger. One day later fails to register any motion. Will now have to follow up on the two year warranty but i'm not holding my breath... Typical passive infrared (PIR) occupancy sensor that is easy to set up and wire. Adjustable time settings are 15 seconds, 5 minutes, 10 minutes, 20 minutes, and 30 minutes. Really wish they had 1 minute as 15 seconds is too short and 5 minutes is much too long. Didn't test the ambient light settings that much (cool feature that won't turn on the lights if the sensor detects enough ambient light). Did change the sensitivity down to 50% (either 50 or 100% sensitivity). The kit included another lens and some pie shaped stickers so that you could 'blind' the sensor to certain unwanted triggers (IE sunlight, window, adjacent space, heater vent, etc). The wiring has a black (hot) neutral (white) and red that goes to the load. Underneath the cover they have two screw holes or you can use the threaded nut connection and washer to affix the stem on the backside through a material such as drywall or plywood. Conveniently the stem also has some thread for 1/2" flexible conduit so no adapter would be needed just in case the application required conduit. Literature lists a two-year warranty. Using this sensor in a walk-in closet for hands free activation and no worry automatic shut off.
Scritto da: Amazon User
Easy install.
So far so good. Turns on when you expect. I use it for a closet and the range is perfect. It has multiple time and light settings. Also includes tape pieces to mask from detecting unnecessary movment. I bought it because I could mount it without requiring additional install of junction box. Keep in mind you still need access to ceiling to tighten nut that holds it against drywall. So don't place too far from light fixture. Looks nice and clean.
Scritto da: Jeff
Excellent solution for ceiling sensor
This ceiling mounted infrared motion sensor works as described and is well made. Although it appears to be designed for suspended ceiling applications, I was able to install this in an existing sheetrock ceiling to control a ceiling fixture in a hallway. I used an old work ceiling box and a cover plate because the size of this sensor did not match with any old work box that I could find readily. This unit has been performing flawlessly for several weeks now. UL listing is a plus.
Scritto da: Fab.
works ok
But needs adjustment, change of the cap head depending of your configuration otherwise you need to be right under for it get triggered.
Scritto da: ronald rorick
works great
i use it for a bathroom and its work great
Scritto da: Cam Summerfeldt
Not a direct fit for standard ceiling boxes.
Great operation but not typical mounting style or size. Extra trim pieces will need to be made or purchased.

Produtos relacionados

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array