Peças genuínas MTD (19A30045OEM Double Mower Bagger - para tratores de gramado de 36 polegadas (2020 e posteriores) serve para vários modelos Troy-Bilt, preto

Name: Peças genuínas MTD (19A30045OEM Double Mower Bagger - para tratores de gramado de 36 polegadas (2020 e posteriores) serve para vários modelos Troy-Bilt, preto
Brand: MTD Genuine Parts
SKU: 0037049967773
Price: 1092.09 EUR
Availability: InStock

Brand:MTD Genuine Parts

2.6/5

€
1092.09

INCLUÍDO: O conteúdo inclui dois sacos, calha, capô, suportes de montagem e hardware. Para obter instruções detalhadas de instalação, consulte o manual do operador. MELHORE SEU GRAMADO: Ensacamento de aparas de grama cria uma aparência nítida e deixa para trás um gramado bem cuidado. FÁCIL DE USAR: Os sacos fáceis de esvaziar são feitos de material resistente e apresentam uma alça integrada e um fundo termoformado. A calha de descarga é feita de tubos flexíveis e fornece uma visão clara do fluxo de grama. QUALIDADE EXCEPCIONAL: Testado e aprovado na fábrica para fornecer o ajuste, resistência, durabilidade e desempenho perfeitos. Desempenho superior de ensacamento com capacidade de 6,5 alqueires. Apanhador de grama: serve na maioria (não em todos) tratores de gramado Troy-Bilt com decks de corte de 36 pol., 2020 e posteriores. Consulte a etiqueta da lista de peças sob o capô do condutor para obter as peças do equipamento original.

Nenhuma unidade disponível

EAN: 0037049967773

Categorias Pátio, gramado e jardim, Ferramentas elétricas para ambientes externos, Peças de reposição e acessórios, Peças e acessórios para cortadores de grama, Peças de reposição para cortadores de grama Parts,

Customer Reviews	3.6 3.6 out of 5 stars 52 ratings 3.6 out of 5 stars
Item Weight	57.9 pounds
Manufacturer	Arnold Corporation
Product Dimensions	41.25 x 24.5 x 20 inches

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Mark A

Money well spent over a hand-held backpack blower/vac, for leaves

I bought a Craftsman T100, 36 inch tractor at Lowes this past Spring. When Fall arrived and leaves started covering lawn, I did what I usually did, I broke out the hand held backpack blower/vac. After blowing leaves into a pile of about 15' x 8' x 3' tall, it took me 17 trips from the back yard to the front yard and about 4 hours, to suck up all the leaves and dump on the front curb to be collected by my Boro. I could barely get out of bed the next morning. So I invested in this Bagger for my tractor. Everything went together well, except for the chute that connects to the deck. It is molded slightly smaller than it should be, along the bottom of chute that is supposed to fit inside the lip of the deck. Mine was about 5/8" too small which left a gap at the deck opening of about a 1/4", but was still snug around the deck opening. I did not notice this gap to effect performance any. The instructions of bagger suggest that you do not let the bags get overfilled, but without a sight-glass in the top of bagger cover/lid, how do you tell? I wasn't going to constantly stop to check how full the bags were. I just kept an eye on see-thru round tube. When I noticed the leaves started backing up, I stopped cutting, drove to the curb and emptied bags. A week after I installed this bagger, the back yard was almost covered again. It only took me 5 trips to clean up my yard and I was using the stock mulching blades on tractor. The leaves were pulverized when I emptied the bags. Much more so than when I used the backpack vac. I did buy a set of new blades for the tractor, Craftsman SBD CMXGZAM110194 54" Ultra High-Lift Bagging Blade Set, Black. This is a 3 blade set and I only need 2, because I couldn't find these blades in a 2-pack, but I intend to install them to use next summer/fall to see if it makes any difference in the performance of the tractor. I highly recommend this Bagger if you have a 36" tractor. This will NOT fit a 42/46 inch deck.

Scritto da: Durrand S.

wrong chute

Chute was actually the wrong one for my year riding mower

Scritto da: Mitch Gomez

Fits Craftsman T100

Purchased with the hope that it would fit my Craftsman T100 36" rider and it did not disappoint. It fit perfect on this mower with no modification needed. I paid $279 for the this bagger when the craftsman one sells for $400+ at Lowes. Instructions were not the best but you can figure it out fairly easy. Did not experience any clogging of chute and the only downside is the bags fill pretty fast.

Scritto da: chiles

Install video would be helpful

This is a Great product, once it is assembled and ready. One could argue that I am not the most handy person in the world, however the company who sells this product should make an instructional video of how it is assembled. It would not take much effort to make even a mediocre video that would save their customers a lot of time setting it up. I found a similar product on YouTube but the installation did not apply to my product

Scritto da: R. RYAN

Chute does not fit Craftsman

The discharge chute did not fit my Craftsman mower deck this application calls by model. It is short by 2" to cover the mower discharge. There are no options provided. So I am buying hard plastic to mold a closure and modifying the bolt alignment. Lotsa adjustments.

Scritto da: DEBORA LLEWELLYN

Missing parts

We are missing parts and the box was broken and opened up at one end

Scritto da: Private

Didn’t come with all bolts and pin

Did not come with all bolt’s and pen

Scritto da: Oral Grant

Riding Lawn Mower Bagger

This it is superb. I am highly impressed. I have recommended this product to others and they are also impressed when they witness it usage.