Parafuso de máquina de aço para peças pequenas, acabamento zincado, cabeça chata, acionamento Phillips, comprimento 5/8, roscas nº 10-32 (pacote com 100) nº 10-32 nº 10-12 totalmente rosqueado 5/8 polegadas 100

Name: Parafuso de máquina de aço para peças pequenas, acabamento zincado, cabeça chata, acionamento Phillips, comprimento 5/8, roscas nº 10-32 (pacote com 100) nº 10-32 nº 10-12 totalmente rosqueado 5/8 polegadas 100
Brand: Small Parts
SKU: 0082893243641
Price: 25.05 EUR
Availability: InStock

Brand:Small Parts

3.7/5

€
25.05

O parafuso de máquina de aço tem acabamento zincado e cabeça chata com acionamento Phillips. O aço é frequentemente usado em aplicações onde a resistência é a principal consideração. O revestimento de zinco oferece resistência à corrosão e uma aparência reflexiva. A unidade Phillips tem um slot em forma de x que aceita um driver Phillips e é projetado para permitir que o driver deslize para fora da cabeça para ajudar a evitar aperto excessivo e danos à rosca ou ao fixador. A cabeça chata tem formato de cone para uso em furos escareados e tem uma parte superior plana que se ajusta perfeitamente à superfície de acoplamento. Os parafusos de máquina estão disponíveis com uma variedade de formas de cabeça, que determinam como o parafuso interage com a superfície de acoplamento e estilos de acionamento, que determinam o tipo de chave necessária para instalar e remover o parafuso.

Nenhuma unidade disponível

EAN: 0082893243641

Categorias Industrial e Científico, Pregos, Parafusos e fixadores, Parafusos, ,

A cabeça chata é em forma de cone para uso em furos rebaixados e tem uma parte superior plana que se encaixa perfeitamente na superfície encaixada. A unidade Phillips tem um slot em forma de x que aceita uma chave Phillips e foi projetada para evitar aperto excessivo. O revestimento de zinco resiste à corrosão e tem uma aparência reflexiva. O aço é frequentemente usado em aplicações onde a resistência é a principal consideração.

Drive System	Phillips
Exterior Finish	Zinc
Head Style	Flat
Item Dimensions LxWxH	0.63 inches
Item model number	ZFHP-1032-10-C
Manufacturer	Small Parts
Material	Steel

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Fatty McFatfat

Good quality screws.

They are great. Your life will improve if you buy these.

Scritto da: kubed_zero

Threads fit hard drive, but not Supermicro Caddy

I bought these screws specifically to mount HDDs in my SuperMicro Server Chassis in the 4 hot swap bays. Standard screws didn't fit, and stuck out too far to allow the caddy to fully enter back into the chassis. I found a couple countersunk screws laying around, and they worked perfectly fine. I then looked for more of them, which led me to this product. I figured that the countersunk, beveled heads would be identical to the screws I tried, and work perfectly with the hot-swap caddies. Upon receipt of the item, though, the heads of the screws were too large. They didn't fully screw in like the other ones that I tried. In short, these screws DID NOT WORK with my hard drive caddy. Three stars though, considering that they are screws that still work and still screw into hard drives.

Scritto da: Slim

Exactly what they should be

What can you say about the bolts themselves? They're exactly what they should be. The nice thing, though, is that they were available from a comprehensive selection, at a very reasonable price, and arrived in just two days. I wasted time checking the three "big box" stores in my area, but none stocked this size bolt with a phillips head. Of course, if they had them, they would have been in a small pack of 6 or 8, which means I'd have paid more for the 36 I needed than Amazon charged me for 100. Amazon/Small Parts comes through yet again.

Scritto da: JL Grizzly

Machine screws

Good screw I just took one star off because the steel they are made of is a little soft, but I must stress you get what you pay for. If you need a screw that is made of a harder steel then you need to go to a company that sells the fasteners you need.

Scritto da: Mackelaus

Normal screws

It was a zinc plated screw. The threads were good and the finish was what I expected

Scritto da: DS

Doesn't match description

There is nothing wrong with the screw itself. But it doesn't match the description on this site. As correctly shown in the drawing, the length of a screw is measured on the threaded portion. In this case, the threads should be 3/8" long. But, in fact, the screw actually has a TOTAL length (threads + head) of 3/8". Therefore, if you order this, you will actually receive a screw that should be labeled as 1/4".

Scritto da: MrLarry0001

Solid Mounting

I use these for installing bottle openers to decorated planks. They are the right size and make for a solid mount.

Scritto da: Living in Hawaii

Inexpensive, works, that's about it.

Comes in a small bag and you almost don't think there are a hundred in there because they are so small. I've used about 40 of them so far and have had no problems. Way cheaper than buying them from the hardware store where they are packaged 10 to a bag for over $1.

Scritto da: Dan

Great product

I needed screws for an xotic effects pedal so I contacted Xotic for replacement screws. Their quick response was tge screws were a 6/32 1/4". That was incorrect. Turns out thread size was correct but the length was half inch. All is not lost as the screws are the perfect replacement for my Sears Washer lid. Now I have an abundance of replacement screws. I'm sure I will find additional uses.