PacTool SA902 Gecko Gauge Siding Kit de montagem, para instalação de revestimento de fibrocimento de 5/16 pol. Corpo de alumínio

Name: PacTool SA902 Gecko Gauge Siding Kit de montagem, para instalação de revestimento de fibrocimento de 5/16 pol. Corpo de alumínio
Brand: PacTool
SKU: 0645646902006
Price: 113.60 EUR
Availability: InStock

Brand:PacTool

3.7/5

€
113.60

DESCRIÇÃO DO PRODUTO Esta é uma peça de reposição genuína, o número do modelo e o nome do seguinte item: Bomba de drenagem da máquina de lavar louça General Electric (GENF0) WD26X10049. DO FABRICANTE Esta é uma peça de reposição genuína, o número do modelo e o nome do seguinte item: General Electric (GENF0) WD26X10049 Bomba de drenagem da máquina de lavar louça

Nenhuma unidade disponível

EAN: 0645646902006

Categorias Ferramentas e Melhorias Domésticas, Ferramentas elétricas e manuais, Ferramentas manuais, Conjuntos de ferramentas,

PACTOOL: Confiável por décadas, somos os líderes em projetos especializados de construção, renovação e remodelação; Nossa linha de produtos de ponta inspira artesãos e DIYers a trabalhar de forma mais inteligente, medir melhor e consertar com mais eficiência. EQUIPAMENTO PROFISSIONAL: Leve seu projeto de tapume para o próximo nível com nossa ferramenta de tapume de casa de alumínio para empreiteiros de serviço pesado; Este produto é recomendado para uso com produtos de revestimento com primer (não pintados). BLOCO DE MONTAGEM: Nossos medidores podem ser ajustados para aberturas laterais de 5”, 6”, 7” e 8”, e o mecanismo patenteado Friction-Cam suporta comprimentos completos de placas de cimento de 12'; Esse recurso garante espaçamento perfeito e igual entre cada placa. FERRAMENTAS DE COBERTURA: Deslize, trave, pregue; Esses clipes de mãos livres são projetados para manter a placa na altura correta e ajudar a instalar o revestimento de fibrocimento facilmente, com menos fadiga, enquanto produz revelações de revestimento precisas e consistentes. PRO GRIP CLAMP: Ideal para instalação por uma pessoa, este bloco de montagem lateral mede e suporta o próximo curso para pregar, praticamente sem tempo de layout; Tornando qualquer trabalho ideal para instalação por uma pessoa, com mais precisão e 50% mais rápido.

Batteries Included?	‎No
Batteries Required?	No
Batteries Required?	‎No
Brand	PacTool
Brand	‎PacTool
Color	Silver
Color	‎Silver
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 984 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎2.5 x 6 x 11 inches
Item model number	‎SA902
Item Package Quantity	‎1
Item Weight	‎1.5 Pounds
Manufacturer	‎PacTool
Material	Aluminum
Material	‎Aluminum
Part Number	‎SA902
Pattern	‎Mounting Kit
Power Source	Hand Powered
Power Source	‎Hand Powered
Product Dimensions	‎2.5 x 6 x 11 inches
Style	‎Aluminum body

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Jay Moore

Easy to use and perfect results.

I like it produces the same result time and time again. I used these to install 5/16 hardi cement fiber siding.

Scritto da: dex-fan

Quality

Product ok for the price.

Scritto da: M. Kepler

Don’t do siding without these.

I can’t recommend these clamps enough. I sided a 2200 sq ft house with Alura cement plank siding almost entirely by myself. Some reviews say that they scratch the planks - but I think if you’re installing pre-painted materials you’re asking for such trouble. Thats just not the way things work, and if you try you’ll be disappointed. Putting a finish on materials before installation is like washing dishes before you eat. Reviews also say they dont’t hold the planks well, or there is a gap that the plank can slip into. I can see how this might happen, but on this whole house i had a clamp slip once, and that was because i was trying to slide the plank along the clamp without lifting it - obviously an unsafe move. Under normal careful use the friction clamp seems to work fine. The gap issue wasn't a problem for me - its easy to get then to grip without over-clamping them and creating a gap. Honestly, if you can’t figure these out, you should not be building or repairing your house. You’re goinna poke an eye out or something. I would recommend that you buy some fiberlock nuts to replace the “acorn” nuts that hold the cam pins in place - the repeated use loosens them and the fall 20 feet off your scaffolding and you never find them. At Ace fiberlock nuts are like $0.35 each. So for an extra dollar i got a perfect tool. Not sure how long the friction pads will hold up - like i said, after one house they work fine, but Professional use might wear them out. But if you’re a professional, are you going to worry that an inexpensive tool only lasts 5 or 10 houses? I think just the materials for my siding project came out to over $4000, plus $1400 in scaffolding rental, blah blah, $$$$. Replacing this tool when it wears out is not going to cut into your profits much. Even if they were single-use it would be worth it, these clamps are so helpful.

Scritto da: Shang wei Tang

Probably the first time I used it, one was tight and one was loose, and I thought it was broken at first until I fixed it. But the design of the tool needs to be improved

Scritto da: dqchris

A must have for Hardy plank!

This is a must have tool for making your Hardy siding look great with even spacing.

Scritto da: Poodle Mom

Yep…

All the good reviews are definitely correct- these things are amazing!

Scritto da: Ady Almeida

Excelente.

Muy bueno, solo que se afloja muy rápido Pernos.

Scritto da: John Richardson

Good product

I had to keep tightening the bolts, but otherwise they worked great

Scritto da: Flavia

Good as gold

My husband used this clamps for cladding front and back of the house on his own. Five star definitely.

Scritto da: BRW

Great Product.

Used these gauges for installing Hardy Plank on my shed. As one of us cut the planking, the other installed onto the shed. Like any construction product - preparation simplifies the process. My helper had used them before which sped things along quite quickly. For two old guys - we planked the shed in two days.

Scritto da: Vincent

Égratigne un peux le revêtement

Va très bien mais égratigne un peux le revêtement foncé faut être délicat

Scritto da: Roman Panciuc

Plastic is better and easier to use

very narrow and hard to adjust

Scritto da: /T

Watch Thickness of Siding

This is my second set purchased. First set didn't work out due to buying the wrong model number for thickness of siding. Previous set were to big and would fall off the building.