Milton - 10188 1018-8 1/4 NPT Metal FRL Recipiente de filtro

Brand:Milton

1.8/5

102.46

Este microfiltro Milton de 1/4 NPT é fornecido com dreno noturno automático interno pré-montado, que funcionará quando o suprimento de ar for interrompido ou quando houver acúmulo de líquido no recipiente do filtro. O sistema defletor de 3 estágios incluído oferece excepcional remoção de umidade. Este microfiltro inclui um elemento filtrante de bronze poroso sinterizado de 40 mícrons que permite menos quedas de pressão e intervalos de limpeza mais longos. Os microfiltros removem água prejudicial ou condensado de óleo, incrustações de tubos, sujeira e ferrugem de sistemas de ar comprimido e são usados ​​como pré-filtros para filtros do tipo coalescente para garantir alta eficiência e longa vida útil do elemento. A tigela de metal resistente à corrosão tem capacidade para 6 onças. Máximo de 250 PSI e 48 SCFM. O dreno noturno manual incluído tem duas funções; uma vez que a pressão cai, a água escoa pelo fundo ou também pode girar o botão serrilhado no dreno para drenar manualmente a água.

Nenhuma unidade disponível
Faixa de temperatura de 40 graus Fahrenheit a 160 graus Fahrenheit. Instale a montante dos reguladores. Máximo de 48 pés cúbicos padrão por minuto a 100 libras por polegada quadrada. Pressão máxima de 150 libras por polegada quadrada. Rosca de tubo nacional 1/4.
Is Discontinued By Manufacturer No
Item model number 1018-8
Manufacturer ABCO

1.8

2 Review
5 Star
46
4 Star
0
3 Star
0
2 Star
0
1 Star
54

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Emad
Arrived without instructions
I purchased this air filter with the recommended mounting bracket recommended by Amazon. The filter came without any instructions and the mounting bracket doesn't fit. Useless.
Scritto da: Technoman
Does not come with bracket to hang it, but solid as a rock!
Tried a couple others at the local hardware stores that didn't take care of the moisture while living in the Southeast USA. Decided to give Milton a try, and glad I did. Other review complaining about a disassembled filter and bowl assembly should have returned it, because these come assembled and ready to mount and apply fittings. My drain screw is a little stiff, but a gentle squeeze on a simple pair of pliers does the trick. And I can tell it won't be too much longer and I won't need the pliers either. Probably a break-in period. This is the correct mounting bracket for a Milton - 10188 filter bowl if mounted on its own: Milton S-1163-1 Filter or Lubricator Mounting Bracket. Other options as well since it's all 1/4" fittings I'm sure you could come up with if doing more than just this filter bowl. So far it's been like it isn't even there. Buying another one for my outside garage too where my larger compressor sits. These also come in larger sizes for larger volume needs if you have a larger air compressor.

Produtos relacionados

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array