ENERLITES Combination Decorator Rocker/Blank Outlet Wall Plate, Tamanho padrão, 2-Gang 4,50 polegadas x 4,57 polegadas Tampa do interruptor de luz, termoplástico de policarbonato, listado na UL, 880131-W, branco

Brand:ENERLITES

3.7/5

24.37

Inclui parafusos para combinar com a placa de parede; Listado pela UL. O acabamento liso sem linhas rebaixadas e bordas suaves permite uma limpeza fácil. Substituição fácil de qualquer placa de parede da mesma configuração. Dimensões: 4,50 altura x 4,57 comprimento. Resistente ao calor e ao desbotamento a temperaturas acima de 100 graus, o que os protege contra descoloração e desbotamento com o tempo. Inflamabilidade UL94, classificação V2. Feito de material termoplástico de policarbonato para fornecer durabilidade, flexibilidade e resiliência para suportar impactos fortes e força pesada.

Inclui parafusos para combinar com a placa de parede; Listado pela UL. O acabamento liso sem linhas rebaixadas e bordas suaves permite uma limpeza fácil. Substituição fácil de qualquer placa de parede da mesma configuração. Dimensões: 4,50 altura x 4,57 comprimento. Resistente ao calor e ao desbotamento a temperaturas acima de 100 graus, o que os protege contra descoloração e desbotamento com o tempo. Inflamabilidade UL94, classificação V2. Feito de material termoplástico de policarbonato para fornecer durabilidade, flexibilidade e resiliência para suportar impactos fortes e força pesada.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ENERLITES
Brand ‎ENERLITES
Certification ‎UL
Color White
Color ‎White
Customer Reviews 4.7 4.7 out of 5 stars 2,615 ratings 4.7 out of 5 stars
Finish ‎Glossy
Finish Type ‎Glossy
Included Components ‎Wall Plate, Screws
Installation Method ‎Screw-In
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 4.57 x 0.16 x 4.5 inches
Item Dimensions LxWxH ‎4.57 x 0.16 x 4.5 inches
Item model number ‎880131-W
Item Package Quantity ‎1
Item Weight ‎0.01 Ounces
Manufacturer ‎Top Greener Inc
Material Thermoplastic
Material ‎Thermoplastic
Mounting Type ‎Wall Mount
Number Of Pieces ‎1
Part Number ‎880131-W
Product Dimensions ‎4.57 x 0.16 x 4.5 inches
Size ‎4.50 inch x 4.57 inch
Style ‎Wall Plate
Switch Style Decorator
Switch Style ‎Decorator

3.7

13 Review
5 Star
81
4 Star
13
3 Star
4
2 Star
1
1 Star
1

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Peezy
Quality Product
Sturdy and high quality. It is highly recommended.
Scritto da: RhysKrispies
Hard to find
Apparently not too many of use remove/move switches and need the half blank.
Scritto da: Steve M
Expensive For a Simple Wall Plate
It does the job, but it's expensive for what you get. You can get them in contractor packs for about $1.50 each, but buy a single plate and it's 4x the price.
Scritto da: Chris
No further comments
No further comments
Scritto da: M. Hocker
Disappointing
seller: Amazon. As stated, the cover is low grade 430 stainless (magnetic), fabrication/appearance is good quality, no very sharp edges, screw depressions are adequate. The disappointment is that the screws are poor quality "oval head" that are more like hemispherical head. They seem to be chrome plated magnetic, take a while to verify if stainless 400 series or not. They do look like the pictures for the product, but it is hard to realize how far the heads project, or how shiny the heads appear. I also found the screws are just a thread or two shorter than other suppliers, and thus slightly harder to install. Be ready to fumble the fasteners a few times more depending on how deep the box is. The Enerlites contrasts to higher cost Leviton 300 series (non-magnetic) stainless plates with good quality fasteners, the fasteners are also 300 series stainless, and proper more matte finish oval head. Leviton plates tend to have sharp edges requiring a bit more care installing, edges are not exposed to users. Net: I'd avoid the Enerlites stainless plate for wet environments or salt/seaside environments (due to 430 series stainless), or for locations where one might encounter the overly projecting fastener heads. For appearance the Enerlites plates are functional with appearance similar to other stainless plates-- except for those shiny fastener heads.
Scritto da: Jordan V
Perfect fit for single smart switch
Changed out two pole switches for a ceiling fan for a smart switch, this surround fits perfectly and completes the project
Scritto da: Gene Wisch
Need all the screws!!!!
Product arrived on schedule. Install was easy but screw was missing making the plate loose. Now I have to go searching for a screw!!
Scritto da: matty
Great fit
Precise fit, solid, not cheap
Scritto da: Amazon Customer
Exactly what I was looking for
This was exactly what I was looking for. The off-set screw holes are great. Just think the price was steep. But I probably will never need another one.
Scritto da: Susan D.
It’s decent
The price is good and it looks okay. What I don’t like about it is, the screws don’t line up and it shows. But other then that, it’s good.
Scritto da: Alexandre Caron
Tres bien
Facile a installer ,couleur exact tres bonne qualité
Scritto da: Lorna
Does the job
Saved me going out to look for one
Scritto da: Michel Brunelle
Bon bas prix
Bas prix comparé à produits locaux

Produtos relacionados

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array