Delta Faucet Lahara Série 17 Kit de acabamento de válvula de chuveiro de dupla função, inoxidável T17038-SS (válvula não incluída) de alça dupla inoxidável

Name: Delta Faucet Lahara Série 17 Kit de acabamento de válvula de chuveiro de dupla função, inoxidável T17038-SS (válvula não incluída) de alça dupla inoxidável
Brand: DELTA FAUCET
SKU: 5272003741210
Price: 309.88 EUR
Availability: InStock

Brand:DELTA FAUCET

3.7/5

€
309.88

DESCRIÇÃO DO PRODUTO Assim como as ondas do mar, as alças curvas e as linhas elegantes da Lahara Bath Collection causam uma impressão duradoura. Este acabamento Brilliance Stainless tem subtons quentes e sutis que o tornam uma excelente combinação com níquel escovado ou aço inoxidável e é extremamente versátil, complementando praticamente qualquer visual, seja ele tradicional, de transição ou contemporâneo. Com alças separadas para controle de volume e temperatura, este kit de acabamento de chuveiro DELTA com alça de ducha de função dupla oferece uma experiência de banho mais refinada. Basta definir a temperatura da água na sua temperatura preferida e ligar ou desligar o chuveiro com o botão de controle de volume - sem interromper a temperatura definida. As válvulas de chuveiro de equilíbrio de pressão DELTA usam a tecnologia Monitor para proteger você e sua família de mudanças repentinas na temperatura da água devido à descarga de vasos sanitários ou aparelhos em funcionamento. Esta unidade não inclui a Válvula Universal DELTA MultiChoice necessária e deve ser adquirida separadamente (recomendamos o modelo preliminar R10000-UNBX). Vazão: 1,75 gpm a 80 psi, 6,6 L/min a 552 kPa. Você pode instalar com confiança. DO FABRICANTE Assim como as ondas do mar, as alças curvas de uma peça e o bico elegante de Lahara(R) causam uma impressão duradoura. Arrumar-se de manhã está longe de ser rotina quando você está cercado por um banho que reflete seu estilo pessoal. O chuveiro torna-se o seu santuário privado, onde sprays corporais e chuveiros funcionam em perfeita harmonia.

Nenhuma unidade disponível

EAN: 5272003741210

Categorias Ferramentas e Melhorias Domésticas, Luminárias para cozinha e banheiro, Luminárias para banheiros, Banheiras e chuveiros, Sistemas de banheira e chuveiro,

GARANTIA LIMITADA VITALÍCIA: Você pode instalar com confiança, sabendo que este kit de acabamento de alça de chuveiro Delta é apoiado pela garantia limitada vitalícia da Delta Faucet. INSTALAÇÃO: A instalação deste produto pode exigir a remoção de azulejos ou paredes de chuveiro existentes se o corpo da válvula atual não for uma válvula universal Delta MultiChoice. Considere consultar um profissional de instalação antes da compra. ALÇA DE DUPLA FUNÇÃO: A alça de chuveiro de dupla função permite ajustar a temperatura e o volume da água separadamente para controle máximo. PROTEÇÃO CONTRA MUDANÇAS REPENTINAS DE TEMPERATURA: O cartucho de válvula de equilíbrio de pressão do monitor (incluído) garante uma temperatura consistente do chuveiro, equilibrando a pressão da água quente e fria, para que não haja mudanças repentinas de temperatura da descarga do vaso sanitário ou dos aparelhos em funcionamento. ROUGH VENDIDO SEPARADAMENTE: Somente kit de acabamento para chuveiro, compre a válvula de chuveiro universal MultiChoice da Delta separadamente para completar a unidade (válvula de entrada aproximada recomendada, modelo R10000-UNBX ou R10000-UNBXHF).

Batteries Included?	‎No
Batteries Required?	‎No
Battery Cell Type	‎Alkaline
Brand	DELTA FAUCET
Brand	‎DELTA FAUCET
Color	Stainless
Color	‎Stainless
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 1,602 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Brushed
Finish Type	Brushed
Finish Type	‎Brushed
Handle Material	‎Brass
Included Components	‎Diverter Trim
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎T17038-SS
Item Package Quantity	‎1
Item Weight	‎1 Pounds
Manufacturer	‎Delta Faucet
Material	Zinc
Material	‎Zinc
Mounting Type	‎Wall mount
Number of Handles	1
Number of Handles	‎1
Part Number	‎T17038-SS
Product Dimensions	‎9 x 5 x 9 inches
Size	‎9.00 x 8.00 x 0.06 inches
Style	‎Dual-Handle
Warranty Description	‎Other

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Brent T Henning

Works as advertised

The function of this faucet is great. The only thing I worry about is the hot / cold knob seems a little flimsy. I sure hope that little knob on the end holds up to long term use. The larger on / off knob seems pretty sturdy. We replaced another faucet that broke and the plumber had to cut a hole in the wall. My fingers are crossed that we don’t have to do the same thing a few years down the road for this one.

Scritto da: OT

Is not compatible with all Delta Faucets.

The two handle faucets are nice to have. We were replacing the trim to change the color from Gold to Brushed nickel. Most everything is compatible, but not the cover stem for the control knob. The older model has a longer stem. One would need to replace the supplied cartridge inside for this to fit. You can call Delta for advice, and they may or may not understand what you are asking.

Scritto da: Reebbeer

Controls heat and volume.

Just get delta‘s universal valve body, install that in the wall and then put your cartridge in that and now you can control the water pressure and temperature independently. Once you install the universal valve body you can put any face plate or valve handle on it you want just make sure it’s compatible with the universe of our body. This kit comes with the Cartridge and everything to install into the universal valve.

Scritto da: Amazon Customer

Efficient upgrade option for my customer.

Instructions were poor, but a little experience, and all went well.

Scritto da: post

Dual Control

Customer wanted the control of separate pressure/temp mix. This did the job and was affordable for a retired couple.

Scritto da: Lesley Zammit

Co ordinates with all pieces

Shiny , looks great!!

Scritto da: Keith G.

Delta is Good Value

I do bathroom remodels for a living and have installed a lot of tub/shower valves over the years. Delta never disappoints. They are easy to install, work flawlessly for years and look great. When other brands are changing all of the trim pieces to plastic, most of the parts in a Delta trim kit are still metal. One thing to note about the rough-in valve body: If you are sweat fitting the pipes directly to the valve body, remove the mounting plate prior to putting a torch on the fittings. The plate is anodized aluminum, and a MAPP gas torch is hot enough to melt it. It won't give you any warning that it's getting too hot. It just suddenly vaporizes. Delta used to make that part out of brass, but not any more. If you take that precaution and follow the rough-in guide for placement (a 2x6 at the back of the soffit pushed up against the drywall at the back puts the valve right where you want it for 3/4" of backer board and tile).

Scritto da: Deb

Works as it should

Install was easy after watching the YouTube videos from Delta. Setting up the temperature was tricky. I just kept moving the black plastic dial until it was the right temperature. The water pressure is great. We did have a problem in the beginning with low pressure. It ended up being some junk stuck in the filter of the shower pipe. Currently the shower is working but it is dripping when in the off position. I can rotate the pressure dial 360 right past the stops. I am working with Delta to resolve this. Too bad this unit uses plastic gears. Update: worked with Delta support to resolve the issue. Tech support was great. The unit is working perfectly now. This is a company that stands behind its products.

Scritto da: Savvy buyer

Quality product, good price, prompt delivery

Product price ordered via Amazon and supplied direct from manufacturer (Delta/Masco) was significantly less than if ordered via big box stores or plumbing suppliers. Delivery was prompt, less than a week, and exactly what I wanted. I've installed a number of these Delta shower / tub temp controllers and very happy with them. Clean simple look. Note that this is just the control cartridge and the handles and covers - you also need to order a Delta "rough-in", which is the metal (brass) assembly which connects to the plumbing piping ie water supply and shower head etc and is mounted in the wall. This "monitor" installs into that rough-in after you have completed the tiling or other wall finishing around the rough-in. Note that you have to be extremely careful to mount the rough-in to the correct depth in the wall, so that AFTER the tiling etc is completed, the rough-in will project just the right amount into the room to allow correct mounting of the monitor cartridge and cover plate. The instructions are all provided - read closely, since impossible to correct once tiled over.

Scritto da: MG

Fits perfectly

I had an older model of the Delta monitor that has been installed 10 years ago. This one came with the cartridge and fits perfectly without having to change the rough-in. Was easy to install and look great..

Scritto da: Amazon Customer

It is a very good tap.

I used it in my en-suite shower. It is quite good. It doesn’t control the temperature of the water quite as accurately as I thought it would.

Scritto da: Matthew Cecile

One of the best faucets I've used

One of the best faucets I've used. Installation instructions could be better and more clear but now that its installed its so simple to use and we love the look of it.

Scritto da: Umais

Love it

Love that i can control water pressure