CURT 55537 Cablagem de reboque personalizada de 4 pinos do lado do veículo, compatível com Dodge Caravan Select, Grand, Chrysler Town and Country

Brand:CURT

3.6/5

72.84

Se o seu veículo não estiver equipado com cablagem para reboque, a cablagem personalizada CURT é a solução ideal. Um chicote de fiação personalizado - também chamado de conector T - é um dispositivo elétrico simples e plug-and-play que se conecta ao sistema elétrico automotivo e fornece uma conexão de fiação de reboque universal padrão. Isso é feito usando dois ou mais conectores compatíveis com OEM específicos do veículo para conectar ao conjunto da lanterna traseira, eliminando a necessidade de cortar, emendar e soldar durante a instalação. Os chicotes elétricos personalizados são feitos para veículos específicos e, embora não estejam disponíveis para todos os veículos, eles oferecem uma das maneiras mais rápidas, fáceis e seguras de conectar um veículo para reboque. Este chicote de plug-in específico fornece um soquete de conector plano de 4 vias e foi projetado para ser um chicote de fiação personalizado para caber em determinados anos da Dodge Caravan, Dodge Grand Caravan e Chrysler Town and Country (para verificar a compatibilidade do seu veículo, consulte as informações do aplicativo ). Ele vem com todos os componentes de fiação necessários para estabelecer uma conexão de fiação de reboque confiável, bem como uma tampa contra poeira para manter o conector limpo quando não estiver em uso. Você tem uma imagem em mente do seu próximo destino - talvez seja o barco que desembarca em seu local de pesca favorito, talvez seja um acampamento com vista para uma das obras-primas da natureza ou talvez seja o próximo grande canteiro de obras. No entanto, transformar essa imagem em realidade exige mais do que apenas sonhar acordado. É preciso uma conexão sólida e a quantidade certa de energia. A fiação personalizada CURT é feita com algumas das tecnologias mais sofisticadas do setor e foi projetada para ser instalada com facilidade, proporcionando uma conexão elétrica duradoura para a configuração do engate de reboque.

COBERTURA CONTRA POEIRA. Para promover o uso duradouro e a resistência às intempéries, este chicote de fios de iluminação de reboque de 4 polos vem com uma tampa contra poeira de borracha. Ele se encaixa facilmente no conector plano de 4 vias quando não estiver em uso, protegendo-o contra os elementos externos. APERTO FÁCIL. Conectar a fiação e as luzes do trailer é fácil com o design ergonômico desta tomada de veículo. Possui abas na parte superior e inferior para uma melhor aderência ao conectar em seu trailer ou desconectar. ESPECÍFICO DO VEÍCULO. Este chicote elétrico de reboque de veículo de reposição foi projetado para anos selecionados da Dodge Caravan, Dodge Grand Caravan e Chrysler Town and Country. CONECTOR PADRÃO. Esta fiação de reboque de 4 planos plug-in pode ser usada para conectar luzes traseiras de reboque, luzes de sinal de freio e indicadores de direção. A fiação de luz de reboque de 4 vias é popular em uma variedade de reboques, adicionando opções versáteis de reboque para seu veículo. FÁCIL DE INSTALAR. Sem corte! Sem emenda! Este kit de cablagem de reboque liga-se à cablagem de fábrica existente no seu veículo e equipa-o com um conector de cablagem de reboque traseiro padrão de 4 pinos para ligar e rebocar um reboque.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 196 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎55537
Item Weight 0.31 Pounds
Item Weight ‎5 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55537
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55537
Product Dimensions ‎9 x 4 x 3 inches

3.6

13 Review
5 Star
74
4 Star
17
3 Star
3
2 Star
1
1 Star
4

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Keith
Quick and easy
This was very easy to install, less than 20 minutes. Works great.
Scritto da: Tricker
Towing with lights is good
Read instructions, installed, lights up my trailer. Saved a bunch of money diy baby!
Scritto da: Alicia Mick
Ok
I wish there was a way to route it a diffrent way but had to come out the back when I use it because of the stow n go but it works fine just tuck it back in the trunk when not using
Scritto da: D. WALTER
Took a little maneuvering to install
When I bought this trailer light wiring harness for my 2005 Chrysler Town and Country, I thought it would be the same as with my 2005 Dodge Durango, and go on in a couple of minutes, but I was severely wrong. With this wiring harness, you have to push the ends of the wiring harness through a couple of prefab holes in your auto body. The problem with this is that there is insulation between the interior and exterior body panels, and the holes you need to push the wiring harness through can get pretty tight. The left side tail light was fairly easy with a larger hole in the body panel, I was able to put my hand in farther, and push the wiring harness easier. The Right side taillight was a little harder because the body panel hole on the interior was smaller, and a little lower than the exterior hole, so much more difficult to maneuver through the body. We ended up cutting the end of the right side wiring harness off, and running the wire through the panel, and then reattaching the harness end to the wire once it was through the body. Also, something I wasn't aware of with this harness is that the 4 pin connector is not maintained on the outside of the vehicle. This wiring harness stays inside the vehicle until you are ready to use it, and then you run the wires out through the back door whenever you're going to use it. The part I don't like about this harness is shutting the door on the wires. I know that there is weather stripping there, and it probably won't cut the wires by being closed on them, but I just feel it might degrade the life of the harness... Otherwise, so far so good. Decent wiring harness, somewhat difficult installation, but still functional, and decent quality.
Scritto da: Nicholas Maddox
Easy to install
Easiest install for any wiring project I’ve ever done!
Scritto da: John F
Quick use!!
Took about 5mins to install. I did not run it back through the body. I just ran the wires under the light assembly. Then pushed the wires inside the van 5mins tops. Didn't care for the ground wire. Had to use a drill Tel screw to the body. They could've tied that into the other white wires since the body harness for the lights is already grounded. Other than that no problems.
Scritto da: Keith J Rigden
Get it
Pretty easy to install in my 06 Grand Caravan. Routing to the passenger side requires you to fish it to the light cavity. Get a good look at what's going on there before you tie on. Wish the set was longer. Watched one video, but it was for another brand. This product is too short to route it their way, which is a little cleaner, but not a big deal. Only reason for knocking a star off. Worth every extra penny to not have splice anything!!
Scritto da: Ashish Desai
Very easy to install and worked with no issues
The harness is super easy to install on a 2005 dodge grand caravan sxt stow and go. Took about 20 minutes with no prior experience of knowing anything dodge or harness wiring. The self tapping ground screw worked instantly under the gamble and the length of excess wire is about 15 inches which is plenty to reach my trailer. Literally you can do this by watching a YouTube video on your phone and doing it same time. Definitely buy this kit and do not pay to get it installed ..you can do It yourself
Scritto da: Kevin from Calgary
Works well for my little trailer with LED lights.
Works well with my little trailer. Note that this kit does not contain a powered converter, so your trailer lights are powered from the vehicle's tail light wiring. If your small trailer has LED lights, this setup is fine. On my 2005 Grand Caravan, this kit will allow the trailer connector to extend outside the tailgate by a foot, or perhaps a little more. It takes a fair bit of cutting in the existing tail light wiring grommets for the hole to be large enough to push the connectors through to the space behind the taillights. That small tube of black silicon sealant is to reseal the grommet where you cut through. I used coil-style plastic wire loom to protect the wiring as it exits under the tailgate.
Scritto da: JP
Price was right, easy to install
Great price point, installed on an 04 caravan, took about an hr but never installed a trailer harness before. Good product!
Scritto da: Mr.Kent
works great.
no problems, works great.
Scritto da: Amazon Customer
... cable cannot be stored in the tire jack compartment like the other brand
It works with the exception that the plug is very tight and the cable cannot be stored in the tire jack compartment like the other brand. Minor problems. Seems to work OK.
Scritto da: Dompti
????
Parfait mais je l’es retourner je n’avais plus besoin.

Produtos relacionados

hot

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array