Correntes de chuva Monarch 20042 Adaptador de calha revestida com pó preto de alumínio Instalação de corrente de chuva, padrão

Brand:Monarch Rain Chains

3.7/5

38.70

Adaptador de calha revestida com pó preto de alumínio da Monarch para kit de instalação de corrente de chuva, tamanho padrão melhora o fluxo de água, reduz respingos e complementa sua corrente de chuva. Adapta-se à maioria das calhas e vem com uma placa de cobre adicional para caber em calhas maiores. Fácil instalação que não requer ferramentas.

Nenhuma unidade disponível
Dimensões gerais do item: o redutor da calha da corrente de chuva mede 5" (C) x 3,5" (L) x (3)" A. Abertura superior 2 polegadas, abertura inferior 1,75 polegadas; Certifique-se de limpar suas calhas antes de instalar o kit adaptador de calha para corrente de chuva em sua corrente de chuva externa. FÁCIL INSTALAÇÃO: O instalador da calha se conecta facilmente diretamente ao topo das correntes da calha de chuva. O parafuso de latão no pequeno adaptador de calha de corrente de chuva tem uma ranhura central para pendurar e prender as correntes de chuva para calhas. AUMENTE A APLICAÇÃO DO MEIO: Um instalador de corrente de chuva, em combinação com calhas de corrente de chuva para calhas, oferece um recurso de meio-fio exclusivo que irá melhorar a aparência de sua casa. Complete o visual adicionando uma de nossas bacias de ancoragem ou estacas de ancoragem. CONSTRUÇÃO DE QUALIDADE PREMIUM: O instalador de calha de corrente de chuva é feito de alumínio com um parafuso de latão para pendurar sua corrente de chuva. O kit de correntes de chuva oferece uma maneira segura e perfeita de pendurar suas correntes de chuva na calha. DESIGN FUNCIONAL: O adaptador de corrente de chuva é projetado para caber na calha de chuva sobre o orifício de drenagem onde há uma calha. O suporte da corrente de chuva capta a água da chuva e afunila para baixo para direcionar a água da calha para as calhas da corrente de chuva.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Produtos relacionados

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array