Conjunto de placa de base/bucha Milescraft 1201 para roteadores médios

Name: Conjunto de placa de base/bucha Milescraft 1201 para roteadores médios
Brand: Milescraft
SKU: 730337086780
Price: 45.32 EUR
Availability: InStock

Brand:Milescraft

3.4/5

€
45.32

DESCRIÇÃO DO PRODUTO Troca rápida de buchas guia sem ferramentas em qualquer fresadora. Adapta-se à maioria dos roteadores (incluindo 3HP). instale e remova as buchas-guia Turn Lock sem ferramentas. Instale e remova os acessórios do roteador Turn Lock sem ferramentas. DO FABRICANTE A placa de base Milescraft 1201 / conjunto de buchas para roteadores, com tecnologia TurnLock, será a última placa de base que você instalará em seu roteador. Com trocas rápidas de buchas de guia e acessórios de roteadores sem ferramentas, os projetos de roteadores ficaram um pouco mais rápidos e muito mais fáceis. Instale a placa de base uma vez usando o pino de centralização incluído e você poderá trocar as buchas de guia em segundos. Ótimo para aplicações de gabaritos e juntas. Tão fácil quanto trocar as buchas de guia, a base de deslocamento TurnLock e a guia de círculo/borda também podem ser conectadas e removidas da placa de base em segundos. O kit inclui um adaptador top had para converter suas buchas de metal padrão em buchas de troca rápida TurnLock. Inclui buchas de diâmetro externo de tamanho comum: 5/16 polegadas, 3/8 polegadas, 7/16 polegadas, ponta estendida de 7/16 polegadas, 1/2 polegadas, 5/8 polegadas, 5/8 polegadas nariz estendido e 51/64 polegadas.

Quantia

adicionar ao carrinho Comprar agora

EAN: 730337086780

Categorias Ferramentas e Melhorias Domésticas, Ferramentas elétricas e manuais, Peças e acessórios para ferramentas elétricas, Peças e acessórios para roteadores, Templates,

Consulte o manual do produto para penteabilidade do roteador. BasePlate de policarbonato resistente pode ser modificado com uma broca ou arquivo para caber roteadores fora do padrão. Inclui adaptador de chapéu superior para converter outras buchas de metal em buchas de troca rápida. Inclui 8 tamanhos de buchas comuns: 5/16”, 3/8”, 7/16”. Ponta estendida de 1/2, 5/8”, 51/64” e 7/16” e 5/8”. A tecnologia Turn-n-lock apresenta trocas rápidas de buchas com guia gratuito de ferramentas na maioria dos roteadores. As buchas de guia duráveis mantêm o alinhamento consistente com qualquer formato de modelo de roteador.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 643 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Milescraft 1201 Base Plate/Bushing Set for Routers
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎1201
Item Package Quantity	‎1
Item Weight	‎0.3 ounces
Manufacturer	‎Milescraft Inc.
Material	‎Brass
Part Number	‎1201
Size	‎Medium
Style	‎Durable
Warranty Description	‎3 year limited warranty. Milescraft will at its option, repair, or replace without charge, any defects due to faulty materials or workmanship for three years from the date of purchase.

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Rick D.

Very good adapter for plunge routing

My old plunge router bushings weren't working it any more. I needed a new set. With the supplied centering tool, this went on to my Skil router easily and worked great.

Scritto da: T. Dempsey

nearly a perfect router upgrade

I've got a fairly old Ryobi router that came with a router table. I've used it a LOT. recently decided I wanted to try my hand at Dovetail joints and bought a jig for that purpose. I just needed a guide bushing to make it work right. I felt fortunate that this would fit my old router and do the job. the only thing I don't like about it is there is only 3 of the 4 screws holding it to my router's base. also, I can't just install and leave it in place as the adjustment for the bit height while in it's router table is blocked off. still, it works as it's designed and does what I needed.

Scritto da: Penny Watson

Works great.

This allowed my regular router to be used as a pattern router. It fit my router perfectly and performed very well. I would recommend this base plate.

Scritto da: Robb

Great value and solved my problem

I modified the base to fit my small hand router. The plastic base was easy to cut on the band saw. Since I'm using it for cutting F Holes in cigar box guitars, it worked out perfect.

Scritto da: mitchell le

Not the easiest to use or to figure out.

This is not the easiest one to install and to figure out how to use. But it does fit.

Scritto da: ~ƒ

Good for a Starter kit if you do not have a good router plate

Couple things Pro- The unit comes with the base plate so if you do not have a base plate that can accept a 1 3/16 insert to run router collars this will work. The inserts came with a "Tested" for snugness. The reason for that? (See Pic) of an older one I've been using and this is actually my second one. I gave them the benefit of the doubt that I had not SET the insert in FULL lock position, but I DID after checking the 1/2" collar insert into the new base. So that cost me a bit. Which brings me to the Cons Con- The unit has some that have shorter collars than others. IE., 7/16 collar is short enough for a dove tail jig. However if you are using a Harbor Freight Dovetail jig you will want to run the 1/2" collar set at 1/2 deep, using a 14º 1/2" Dovetail bit, preferably a 30.00 One. (See Pic) I ended up having to grind down the collar to clear the stock so the bit can route. The Base Plate has been re cut to now be almost Too Snug to accept the inserts/collars. Really snug. Like Monkey Grip hands to get it out. I am gonna give the brass ones (generic) a shot next round. They thread into the 1 3/16 insert that this plate does come with. The Base plate is 6" across/wide.

Scritto da: Harry Beals

Easy to install

Great product,recommend it

Scritto da: Andrew Levan

Takes Time

I bought this for sign making. Took me about 30 minutes to figure out the right configuration but it worked well. I have the Milwaukee Fuel compact router (which is not on their list). You have to put the large router plate on, and it needs to be offset, only two screw holes will line up. Then I needed my own small screws and nuts to secure the Milescraft baseplate to the large router plate. I think it was grooves B and H. I was pretty disappointed in how the router letters came out but I think that was just the font of the letters I got. I ended up setting up lots of tees and clamps to make my letters.

Scritto da: S.J.Cook

Good!

These are to replace one that I destroyed earlier that same week.

Scritto da: Dale

Happy

Sadly this does not fit my Makita emulation (katsu) palm router, or some modification will be required. But I do like the way it works and fits together with a satisfying snap leaving no excess wiggle

Scritto da: colin wilson

It takes katsu bushes as well !!!

Great with the added multi bush fitment for all bushes for routers.

Scritto da: Graham Coxon

Good Product

Good product good price

Scritto da: Daveyboy

1251 base plate

ordered off amazon arived very prompt, good value for money if your only using for light workshop work. I have looked at more expensive makes but for the ammount of use I need this item is perfect, already used quite a lot it is quick and easy to set up and use. dont know how long it will last but at this price I would buy another replacement without hesitation!