Cen-Tec Systems 94434 Mangueira antiestática de vácuo úmido/seco para aspiradores de oficina com conjunto adaptador universal de ferramentas elétricas, 16 pés, azul 16 pés. Mangueira

Brand:Cen-Tec Systems

3.4/5

€
186.68

O 94434 da Cen-Tec foi projetado para fornecer uma solução completa de mangueira de coleta de poeira dissipativa eletrostática conectando todas as principais marcas de ferramentas elétricas a aspiradores projetados para garantir um ambiente de trabalho livre de choque aterrado. O 94434 forneceu três conectores diferentes e exclusivos para ferramentas elétricas de troca rápida. Esses conectores são projetados para fornecer conexões giratórias de 360 graus na ferramenta para reduzir a tensão proveniente da mangueira que pode inibir o movimento livre da ferramenta elétrica sobre a superfície de trabalho. Os dois adaptadores de ferramenta de baioneta têm um alívio de ar integrado que permite o ajuste do vácuo para evitar a vedação na superfície de trabalho e garantir fluxo de ar suficiente para o vácuo para proteger a vida útil do motor. A mangueira cônica de 16 pés tem um interior liso para melhorar o desempenho do vácuo. Afinando de 1-1/4" na extremidade da ferramenta para maximizar a flexibilidade, a mangueira afunila uniformemente à medida que se estende para o vácuo até um diâmetro interno de 1-1/2". A forma cônica aumenta o fluxo de ar e é complementada pela extremidade da mangueira proprietária da Cen-Tec, projetada para maximizar o diâmetro interno no vácuo, evitando entupimentos. Os adaptadores 94434 são projetados para compatibilidade com todas as principais marcas de ferramentas elétricas, incluindo Bosch, Festool, Milwaukee, Hitachi; Fein; Cobalto; Cabo Porteiro; Black and Decker; Dewalt, Ryobi e muitas marcas próprias de ferramentas e mortalhas de coleta de poeira. O 94434 é compatível com as principais marcas de aspiradores de pó e também com as principais marcas de aspiradores domésticos, como Shop Vac, Ridgid, Craftsman, Vacmaster, Dustless, Fein, Cobalt, Dewalt e Festool.

Quantia

adicionar ao carrinho Comprar agora

EAN: 0810178031566

Categorias Ferramentas e Melhorias Domésticas, Ferramentas elétricas e manuais, Peças e acessórios para ferramentas elétricas, Acessórios para aspiradores e coletores de pó, Mangueiras,

Compatível com as principais marcas de aspiradores de pó e também com as principais marcas de aspiradores domésticos, como Shop Vac, Ridgid, Craftsman, Vacmaster, Dustless, Fein, Cobalt, Dewalt e Festool. Os adaptadores são projetados para compatibilidade com todas as principais marcas de ferramentas elétricas, incluindo Bosch, Festool, Milwaukee, Hitachi; Fein; Cobalto; Cabo Porteiro; Black and Decker; Dewalt, Ryobi e muitas marcas próprias de ferramentas e mortalhas de coleta de poeira. A extremidade do tanque condutora eletrostática proprietária de 2-1/4” foi projetada para maximizar a abertura em seu vácuo, melhorando o desempenho do vácuo e reduzindo o risco de obstruções causadas por detritos maiores. O sistema de baioneta da Cen-Tec fornece 360 graus de rotação para reduzir a tensão da mangueira e permitir o movimento livre de suas ferramentas elétricas. O clipe de acetal durável permite uma troca rápida de extremidades, eliminando o tempo perdido e ajudando você a mover-se rapidamente de uma ferramenta para outra, ajudando a manter seu ambiente de trabalho seguro e limpo. A segunda baioneta condutiva de troca rápida equipada com um adaptador TPE macio condutivo de 1-1/2” para acoplamento com ferramentas elétricas projetadas com uma conexão macho de 1-1/2”. Este segundo adaptador é projetado com três anéis concêntricos no diâmetro interno para garantir que permaneça no lugar em aplicações com fluxo de detritos pesados sob alto vácuo, como encontrado em serras de esquadria. Apresenta um adaptador de ferramenta baseado em TPE macio condutivo eletrostático (ESD) de 1" para combinar com todas as principais marcas de ferramentas elétricas e coberturas equipadas com um conector macho de 1" ou uma conexão fêmea de 1,425". O adaptador é projetado com quatro anéis concêntricos no diâmetro interno para garantir uma conexão positiva à prova de vazamento que permanecerá no lugar enquanto a ferramenta estiver em uso. O adaptador de 1” é instalado em uma baioneta condutora eletrostática de troca rápida equipada com alívio de ar para permitir o controle do vácuo para garantir o movimento livre da ferramenta elétrica. A mangueira combina um interior liso, excelentes propriedades mecânicas, com características antiestáticas permanentes sem manchas ou marcas pretas. A mangueira tem 1-1/4” onde se conecta à ferramenta elétrica para maior flexibilidade e afunila uniformemente em diâmetro para 1-1/2” na extremidade do vácuo para fornecer fluxo de ar superior e reduzir o entupimento. Solução de mangueira de coleta de poeira dissipativa eletrostática de ponta a ponta cônica de 16 pés para conectar ferramentas elétricas de marcas importantes a aspiradores aterrados ou aspiradores que foram modificados para criar uma solução aterrada para dissipação de cargas estáticas.

Assembly required	No
Batteries required	No
Brand	Cen-Tec Systems
Color	Blue
Customer Reviews	4.4 4.4 out of 5 stars 112 ratings 4.4 out of 5 stars
Item model number	94434
Item Weight	3.09 Pounds
Manufacturer	Cen-Tec Systems
Material	Thermoplastic Elastomer
Material	Thermoplastic Elastomer (TPE)
Package Dimensions	17.38 x 17.22 x 7.41 inches

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: faron sturtz

Great customer service and product by Cen-Tec

Hose was delivered by Amazon very quickly. The box had old shipping paper holders and torn off shipping stickers so right away I figured I had got someone else's return. Fittings for the hose were loose in the box along with the torn open plastic bag that they should have been in. Nothing had been used so I figured I got lucky. Then I noticed the hose end that connects to the shop vac was missing. I assume someone ordered it and kept that part and sent it back. I was going to start a return but decided to message Cen-Tec and give them a chance to correct the issue. Penny with Cen-Tec emailed me back the following morning and got the part right out to me. Great customer service and I will definitely be buying from them again. The hose itself works great. It is very flexible and the anti static feature is awesome. Also love the quick change adapters for different tools in the shop. Great product and customer service!

Scritto da: Roger

Good quality hose but frustrating unavailability of parts and accessories

I wanted to update my hose on my 6.5 HP Shop Vac (see photo). I purchased this understanding that it was for (tool) dust collection but I thought that I could also make it work to use my 1.25 inch Shop Vac accessories. The shop vac end fit perfectly (about 2.25-inch OD). The nut from the old hose is no longer needed and it also will not fit the new hose (nut I.D. is too small - see photo). I spent hours researching a way to add a 1.25-inch end on the quick connect end that's designed for dust collection. I gave up. That's okay. I knew this wasn't really designed for that but it would be a great accessory to just be able to quick-connect the 1.25 nozzle. And then I wouldn't need two (or three) expensive hoses. It just seems that an accessory like that should be available. But... Cen-Tec does offer at least 3 hoses that will work for my Shop Vac and have 1.25 ends (92707, 90342, and 94148) and all 3 were available on Amazon - they just aren't quick connect. So - all I need is the screw-on end from one of those hoses. Surely Cen-Tec must supply those as a spare part. Nope. It would easily thread onto the hose but I couldn't find it anywhere. Not on the Cen-Tec website either. So then I thought okay - I will just get another 2.25 (vacuum end, also referred to as the 2.5-inch end in other Cen-Tec hose descriptions) because my Ryobi Table Saw dust-collection port uses the exact same size as the vacuum end of the hoses. The vac end plugs right into my table saw port - just like it was made for it. The table saw port I.D. is about 2.3". Nope. That's not available either. I researched the Cen-Tec website but that website has less information than Amazon. So I was unable to purchase any accessory - screw-on or click connect in any brand - that would allow me to use this dust collection hose on the dust collection port of my table saw. I didn't really want two expensive hoses but I was willing to keep this one if I could just make it work on my table saw. One thing that is really frustrating is that very few adapters and accessories (Cen-Tec and others) give the outside diameter and/or the inside diameter(s). And it's not just me. I spent hours looking through reviews - trying to find information that I cannot find in item descriptions. And while I was doing that I saw lots of persons that ordered something that did not fit their application. Sometimes if dimensions are listed it doesn't say if it's I.D. or O.D. Or - when it does - it's not clear if they are referring to the accessory or the device that it attaches to. Amazon reviews were helpful for that but I still didn't find anything. Cen-Tec uses different terms for the same item in some cases. Sometimes they refer to the common-size vacuum end as 2.5-inch and in this ad they refer to it as 2.25-inch. The 2.5 description probably comes from the 2.5-inch hose-size if the reducer was not used. I even tried to find a 2.5 inch hose with a 2.5 (2.25) fitting on each end. I couldn't find that either - in any brand. I ordered the Cen-Tec 94148 hose for my shop vac but had to return this hose. I was willing to keep it but just couldn't find a way to make it work as a table saw dust collection hose. I'm sure there is a way to do it but I was not willing to invest any more hours in it. I've probably spent 6 to 8 hours on it already. It just seems silly that I cannot get the 2.25 end on each end of the hose - unless I purchase and additional Cen-Tec hose and remove that end and attach it to the other hose. That seems wasteful and I didn't want to spend $35 for just that end and have to discard the hose. I guess I'll have to drive around to hardware and plumbing stores and try to find a Fernco rubber plumbing adapter that works with some other accessory that I don't have yet - to make it fit my table saw. That was the recommendation of several reviewers. The dimension for the vac end of this hose 2.28" O.D (distal end of fitting). - measured with calipers. It's slightly tapered and an interference fit, and compresses a little bit when you insert it into the standard 2.5 (2.25 I.D.) vacuum port.

Scritto da: I. Gonzalez

Great Antistatic hose, a refreshing change from cheaper factory hoses

Great Antistatic hose, a refreshing change from cheaper factory hoses that attract all kinds of dust or sawdust and then spread it all over. Functions as described and recommend a buy, also cheaper than a brand antistatic hose and works great on my FEIN vac.

Scritto da: TimMan

Nice and long with antistatic

Before I Bought this hose I was continually getting shocked while sanding my woodworking projects. Additionally, I was dragging my shop vac around wherever I needed to sand. With this new longer hose I can put my vac in a central location and just move the hose to the spot that I need to sand. Also I have found that with the grounding built into this cable the static build up has gone away as it is pulled off to ground as the hose lays on the floor. I can’t believe it took me so long to realize they even made a grounded hose AND that it too so long for me to buy it. The hose couplings that came with the hose generally work well. It is still likely you will use any vendor specific fittings that you might have. But the ones that come with the hose aren’t bad. Overall, this set is Highly recommend.

Scritto da: Dog Guy

Good quality shop vac hose

Seems all the shop vacs these days for sale at the retail level have gone super cheap on the hose they provide. They may be great vacuums but the hoses are very poor quality. My last shop vac I literally threw away the hose it came with and kept using the old hose, from my previous shop vac (which was actually my father's shop vac)... so this was a 40 year old hose, it finially gave up. I boutght the Cen-Tech hose as that old hose was failing and I was suctioning large amounts of dust from drywall sanding process. After one sanding session getting static shocks about once every 10 seconds or so I quit for the day and ordered this hose. Works great. The 16 foot length is nice and long without being too long, Hose is super flexible, but plenty strong. Nice set of adapters and the swivel connections are a good feature. The anti-static properties definitely help. I still get the occasional static shock with large jobs but its reduced by about 80 to 90%.

Scritto da: James S.

dust collection must

If you have a power tool that has the capability to capture the dust it makes, this hose comes with adaptors to your vacuum cleaner. I am still trying to attach my dust collector and try it there. Use this with belt sander (Bosch) and domino cutter (Fesstool). Works pretty good.

Scritto da: Spencer

Good quality for a great price

I was worried about the quality of this hose but it looks very durable and the two different ends plus suction control make it a great deal. For Fein vacuums, which I have, the attachment point is a little tight. Fein is standard 2 1/4" ID; this hoses fitting is 2 9/32"-11/32" OD tapered. With a little floor wax it will fit in and stay in snugly. Eventually I'll make a proper adapter using PVC. Anti-static works great too.

Scritto da: Lee M.

No more static shocks !!

Completely solved my static shock problem with my sander attached to my shopvac !! This means I get to do more sanding !! Live it !!