Carlisle FoodService Products Cateraide Carregador final com isolamento de plástico Suporte para recipientes de alimentos, Preto Suporte para recipientes de alimentos pretos Recipientes para alimentos

Name: Carlisle FoodService Products Cateraide Carregador final com isolamento de plástico Suporte para recipientes de alimentos, Preto Suporte para recipientes de alimentos pretos Recipientes para alimentos
Brand: Carlisle FoodService Products
SKU: 0077838121931
Price: 823.18 EUR
Availability: InStock

Brand:Carlisle FoodService Products

3.6/5

€
823.18

Airlock de fermentação versátilNossos airlocks de fermentação North Mountain Supply e rolhas de borracha fornecem a você uma maneira simples, rápida e estéril de permitir que suas cervejas liberem gases e fermentem enquanto permanecem herméticas. As câmaras de ar são projetadas para permitir que o ar passe pela fechadura de uma maneira sem comprometer sua fermentação e permanecer vedado. Isso permite que seus produtos liberem o gás necessário enquanto permanecem estéreis e seguros. Cerveja, vinho, enlatados e muito maisEstas câmaras de ar são versáteis dependendo de suas necessidades e são ideais para uma variedade de processos de fermentação. Eles são uma câmara de ar ideal para seus lotes de cerveja, podem ser usados como uma câmara de ar para produção de vinho e são o complemento perfeito para seus suprimentos de fermentação de vegetais. Simples de usar e fácil de limparEsta câmara de ar de 2 peças é fácil de configurar e instalar . Simplesmente remova a tampa ventilada, encha a câmara até a metade com desinfetante, coloque a tampa de volta e instale-a na rolha de borracha. A tampa permite que o ar escape enquanto evita derramamentos e sujeira do desinfetante. O airlock é feito de plástico durável e projetado para ser fácil de limpar, economizando tempo. 3 tamanhos de rolhas de borracha para escolherNossos airlocks para fermentação vêm com 3 tamanhos de rolhas de borracha para escolher. Isso permite que você encontre o ajuste perfeito para as tampas dos frascos de fermentação ou equipamentos de fermentação e evite uma vedação inadequada que pode comprometer o processo de fermentação.

Nenhuma unidade disponível

EAN: 0077838121931

Categorias Industrial e Científico, Equipamentos e suprimentos para serviços de alimentação, Storage & Transport, Armazenamento de alimentos, Frigideiras para alimentos,

Comprimento interno: 20,75 polegadas; Largura interna: 13,75 polegadas; Altura interna: 17 polegadas. Alças ergonômicas para transporte seguro de duas pessoas. O isolamento reforçado de poliuretano de nível comercial maximiza a retenção de temperatura. Segure até 5 panelas de tamanho normal em uma variedade de arranjos adaptáveis para atender às necessidades de mudança. Mantém as bebidas quentes ou frias por até 4-6 horas.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Carlisle FoodService Products
Brand	‎Carlisle FoodService Products
Capacity	‎2.5 Inches
Color	Black
Color	‎Black
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 1,279 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Two snap clasps, Molded with handles
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Is Dishwasher Safe	‎No
Item model number	‎PC300N03
Item Package Quantity	‎1
Item Weight	‎30.5 Pounds
Manufacturer	‎Carlisle FoodService Products
Material	Plastic
Material	‎Plastic
Number Of Pieces	‎1
Occasion	‎Wedding, Christmas, Birthday, Valentine's Day
Part Number	‎PC300N03
Pattern	‎Food Pan
Product Care Instructions	‎Hand Wash
Product Dimensions	‎17.5 x 25.25 x 1 inches
Product Dimensions	‎17.5"D x 25.25"W x 1"H
Shape	Rectangular
Shape	‎Rectangular
Size	‎24" Exterior Length x 16-3/4" Exterior Width x 25" Height x 17" Depth
Special Feature	Portable, Insulated
Special Feature	‎Portable, Insulated
Special Features	‎Portable, Insulated
Style	‎Food Pan Carrier
Usage	‎Keep food hot, temperature retention, food pan carrier
Warranty Description	‎Carlisle warrants to the original buyer that if this product proves defective

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: Grisel alegria

Buen precio y buena calidad

Excelente para mantener caliente la comida

Scritto da: gary t.

Returned

Not big enough

Scritto da: Doug Bardo

Hinges are weak and bend easily

Holds hot foods hot and cold cold, well insulated. Hinges are weak and bend easily

Scritto da: D Thompson

Easy to clean and very sturdy.

The food carrier kept our food hot for up to 5 hours and we are very satisfied with our purchase. I definitely recommend it to the persons in the food industry. The carrier is also easy to clean and very sturdy. It can be very heavy to move around and will require some manpower.

Scritto da: AZJAZZ

Not the greatest seal but does hold temp pretty well.

Just received this unit today. I was quick to check the door seal as there were some bad reviews about it not sealing properly. It seemed like it was a tight fit by the tension on the latches but the seal looked like it was loose in some areas. So I tipped the unit onto its back and put a bright flashlight inside pointing at the door. I then latched the door shut and dimmed the lights.... I could see light coming through from an area at the bottom wich supports a review I read about juice leaking out in someone's vehicle. There was also light coming from the side and almost the entire top of the door which supports another claim about steam leaking out. I looked at the hinges closley and they do look bent. I was thinking about trying to tweak them to see if I could get a better seal but decided against it due to the fact that it is only plastic that the srews are anchored into and there is a possibility of striping out the holes... I will be returning this unit and buying a different brand. In the photos you can see the light from the flashlight with the door secured shut One is from the bottom, one is from the side where the hinges are and one is from the top. Update... I did order a new Cambro brand similar to this model and was equally disappointed with it. I did the flashlight test wit it and it does not seal well at all either . I came to the conclusion that things are made super crappy theese days and gone are the days of quality control. Maybe one day businesses will take pride in thier workmanship again. But untill then we will all have to settle for substandard priducts. That being said, I did use this Carlisle for a recent cook. I had a brisket and 3 pork shoulder roasts come off the smoker at 10 pm. They were double wrapped in foil and I put them into full size foil pans and added foil to cover the pans. I fell asleep while resting the meat. At 9 am the next morning the brisket and pork was still holding at 140° internal temp. I changed my 1 star rating to three stars because of this and I am considering keeping the unit.

Scritto da: Kindle Customer

works very nicely

I initially tried this product when cooking on a small scale...(one pork butt -or- one brisket). When there isn't a lot of food at service temperature to fill it, it is difficult to maintain 140F+. When used to park about eight pork butts at 140F...it worked gloriously. Verified with a digital thermometer I was able to hot hold pork butts and transfer to a serving line with no problems. When used with hot food in all pans it is terrific. The door comes off easily for cleaning. the handles are nice for two-person lifts into a truck or onto a wagon. There are slots on the sides to park a various number of service trays. Very nice.

Scritto da: Cozie m Anderson

Insulation

It was easy to load and it kept our food warm while we waited to serve

Scritto da: Heather

With some adjustments, it seals pretty well.

This review is to help those with poor seals. The issue for mine was not anything bent or warped, buy rather the hinges were placed 1/8" too low, so the door wasn't engaging at the right height. The first image is the initial seal, taken in the dark with a light inside the unit. The second black image is after I added some washers to the hinge pins to raise the door 1/8", and I also had to adjust the door hinges all the way out, which is easy to do with a screwdriver. Behind the screws is a metal receiver, so don't hesitate to remove them, you won't damage the unit in doing so.