Adaptador SharkBite MNPT de 1/2 polegada, encaixe para encanamento de latão, tubo PEX, cobre, CPVC, PE-RT, HDPE, U120LFA 1/2 pol.

Name: Adaptador SharkBite MNPT de 1/2 polegada, encaixe para encanamento de latão, tubo PEX, cobre, CPVC, PE-RT, HDPE, U120LFA 1/2 pol.
Brand: SharkBite
SKU: 0697285465763
Price: 26.43 EUR
Availability: InStock

Brand:SharkBite

3.7/5

€
26.43

DESCRIÇÃO DO PRODUTO Simplifique suas necessidades de encanamento com o SharkBite Push to Connect MNPT Male Adapter. Composto de latão durável sem chumbo e com um design de fluxo total para saída máxima de água, os acessórios SharkBite podem ser usados com qualquer combinação de tubos de cobre, PEX, CPVC ou PE-RT e apresentam um design fácil de conectar para permitir instalação rápida. Não são necessários frisos, cola, solda ou ferramentas, basta inserir o tubo e os dentes de aço inoxidável mordem e prendem firmemente, enquanto um O-ring especialmente formulado comprime para criar uma vedação perfeita. O adaptador MNPT pode ser facilmente desmontado usando uma ferramenta de desconexão para que conexões e válvulas possam ser facilmente trocadas e reutilizadas (ferramenta de desconexão não incluída). A conexão MNPT pode até ser girada após a montagem para permitir uma instalação mais fácil em espaços apertados. Este acessório de encanamento MNPT é uma junta fabricada certificada que pode ser instalada em linhas molhadas e para aplicações subterrâneas e atrás da parede. O adaptador push to connect MNPT é classificado para 200 psi e 200 graus F e vem com uma garantia de 25 anos. DO FABRICANTE SharkBite é o sistema de conexão push-fit que está realmente pegando. É a maneira mais fácil de unir tubos de cobre, CPVC ou PEX em qualquer combinação - sem solda, braçadeiras, uniões ou cola. Basta inserir o tubo e os dentes de aço inoxidável mordem e prendem firmemente, enquanto um anel de vedação especialmente formulado comprime para criar uma vedação perfeita. A desmontagem é igualmente rápida usando a ferramenta de desconexão simples. Portanto, conexões e válvulas podem ser facilmente trocadas e reutilizadas. Eles podem até ser girados após a montagem para facilitar a instalação em espaços apertados. Obtenha o SharkBite e controle seu próximo projeto de encanamento. Esses acessórios não contêm chumbo e atendem a todos os requisitos de encanamento na Califórnia e em Vermont.

Quantia

adicionar ao carrinho Comprar agora

EAN: 0697285465763

Categorias Ferramentas e Melhorias Domésticas, Canos ásperos, Tubos, conexões para tubos e acessórios, Conexões de tubulação,

CERTIFICADO: A conexão MNPT é certificada como uma junta fabricada e pode ser usada para aplicações subterrâneas e atrás da parede sem painéis de acesso; classificado para 200 psi e 200 graus F. DURÁVEL: A conexão é livre de chumbo e resistente à corrosão para durabilidade e confiabilidade duradouras. COMPATÍVEL COM ESPAÇOS APERTOS: A conexão de latão pode ser facilmente girada no tubo após a instalação para uso em espaços apertados. FÁCIL DE USAR: O conector reto apresenta um design inovador push-to-connect que permite uma instalação rápida e fácil; sem necessidade de ferramentas, solda, crimpagem ou cola. ENCAIXE MACHO DE LATÃO: O encaixe macho pode ser usado para conectar qualquer combinação de tubos de cobre, PEX, CPVC ou PE-RT; pode ser usado para linhas molhadas.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Brass
Color	‎Brass
Connector Type	Adapter
Connector Type	‎Adapter
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Finish	‎Brass
Included Components	‎Fitting
Installation Method	‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	10.75 x 4 x 6.25 inches
Item Dimensions LxWxH	‎10.75 x 4 x 6.25 inches
Item model number	‎U120LFA
Item Package Quantity	‎1
Item Weight	0.1 Pounds
Item Weight	‎0.1 Pounds
Item Weight	‎1.6 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎Inch
Number Of Pieces	2
Number Of Pieces	‎2
Part Number	‎U120LFA
Product Dimensions	‎10.75 x 4 x 6.25 inches
Size	1/2 in.
Size	‎1/2 in.
Style	‎Brass Push Male Adapter
Thread Type	NPT
Thread Type	‎NPT
Warranty Description	‎Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com^*

Sua avaliação

Scritto da: AmazoCedric

The Amazing Sharkbite 1-1/4 connector fitting

This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.

Scritto da: Wendy Chan

It works!

Easy to install and very solid connection. It serve the purpose.

Scritto da: John

Quality

Excellent product

Scritto da: Veetuch

Easy to use

Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.

Scritto da: Anonimo

Initially concerned....

Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!

Scritto da: Reality Check

This fitting really saved the day

I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.

Scritto da: Tom Holland PA

Easy

If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.

Scritto da: T Nielson

false advertising

It said it was a pack of 6, I only got 1

Scritto da: Synonymous

Working great so far

Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.

Scritto da: Mountain man.

Slips on easily and no leaks

Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.

Scritto da: Super Dave

Works great, very long delivery time

First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch

Scritto da: Debashis Dey

New age fittings

Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.

Scritto da: claude

exellent

who ever invented these should be made king