0
0

Total:€ 0.00

Ver carrinhoConfira
LoginRegister
0

Total:€ 0.00

Ver carrinhoConfira
LoginRegister

Adaptador de engate padrão de 3 pontos para reboques e equipamentos agrícolas com pinos de categoria 1 e receptor de 2 engates

Brand:MAXXHAUL

3.5/5

€
225.18

Inclui pinos e buchas de aço sólido para fornecer versatilidade. Dimensões: 19” do meio do pino superior ao meio dos pinos laterais e 27” de uma extremidade do pino lateral à outra extremidade. Estrutura de forma triangular e design de pino inferior exclusivo para máxima estabilidade, tornando-o um suporte ideal para mover tratores, reboques e outros pequenos equipamentos utilitários usando tratores. Construído a partir de estrutura soldada de aço resistente com acabamento de revestimento em pó durável para fornecer anos de serviço. Possui um receptor de engate de 2” para seus acessórios de reboque de 2”. Possui pinos de elevação de categoria 1 com 7/8” de diâmetro e projetados para facilitar a conexão com tratores menores, compactos e de tamanho médio com segurança e facilidade, em vez de usar sua caminhonete.

Quantia
adicionar ao carrinhoComprar agora

EAN: 0812351030397

Categorias Automotivo, Acessórios externos, Towing Products & Winches, Achatos, Receptores,

Inclui pinos e buchas de aço sólido para fornecer versatilidade. Dimensões: 19” do meio do pino superior ao meio dos pinos laterais e 27” de uma extremidade do pino lateral à outra extremidade. Estrutura de forma triangular e design de pino inferior exclusivo para máxima estabilidade, tornando-o um suporte ideal para mover tratores, reboques e outros pequenos equipamentos utilitários usando tratores. Construído a partir de estrutura soldada de aço resistente com acabamento de revestimento em pó durável para fornecer anos de serviço. Possui um receptor de engate de 2” para seus acessórios de reboque de 2”. Possui pinos de elevação de categoria 1 com 7/8” de diâmetro e projetados para facilitar a conexão com tratores menores, compactos e de tamanho médio com segurança e facilidade, em vez de usar sua caminhonete.
Brand MAXXHAUL
Brand ‎MAXXHAUL
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 446 ratings 4.4 out of 5 stars
Finish Type Powder Coated
Item model number ‎50039
Item Weight ‎31.2 pounds
Manufacturer ‎MaxxHaul
Manufacturer Part Number ‎50039
Material Alloy Steel
Model ‎Standard 3-Point Hitch Adapter for Trailers & Farm Equipment with Category 1 Pins & 2" Hitch Receiver
Package Dimensions ‎22 x 21.25 x 7 inches
Vehicle Service Type Pickup Trucks, Tractor, Trailer

3.5

13 Review
5 Star
71
4 Star
17
3 Star
4
2 Star
2
1 Star
6

escreva sua revisão

O seu email não será publicado. Todos os campos obrigatórios são marcados com*

Scritto da: MrRick53
Excellent product.
I needed a 3 point receiver to move trailers on our ranch. Chose this one because of the one day shipping that turned into two days. Unit is well built. I had NO problems with installing the threaded pins into the framework. A little oil and both went in as easy as could be expected. I would recommend and would purchase again.
Scritto da: michael mackenzie
So far so good
worked for my BX22, hooked right up. looks sturdy and well built. used it once and no problems.
Scritto da: Andrew Spang
Needs just a little help, but cheap and functional
As other mention, getting the left pin to thread in can be a problem. The threads were full of debris. I sprayed them out really well with brake cleaner. I then used my grinder to cut two grooves opposite of each other in one of the pins from the top to about 1/2 inch in, just slightly deeper than the threads to make the pin into a rudimentary tap. I threaded the pin in with a screwdriver through the lynch pin hole and worked it back and forth a little to clear the threads. It worked great and I didn’t have to fight with it much. The threaded portion of the pin is much longer than the threaded insert in the device so the small portion I cut the grooves into isn’t even contacting the threads once it is bottomed out. This still beats the retail products in price and the deliver was about a week better than other offerings on Amazon.
Scritto da: JF
Good enough but not perfect
I used a bolt and pipe to power though the poor thread issue. One side ok the other side hard, I figured it was paint or weld splatter. Just took a bit more elbows grease. Should have read more reviews. I liked that it included adaptors for class 2 three point as my JD 1250 is a class 2 but Ford is class 1. Only problem that is comical as the mounting pins were shipped in the same bag is the sleeve adapter won’t fit the included pins. The ones I got from TSC fit just fine. See images. Typical made in china crap QC but I knew what I was buying so buyer beware. Not a problem for me but I can see how some are getting really bad threads. Not a big deal wrong sleeves sent but requested correct size from manufacture so we will see how good their customer service is. The unit was packaged well, no shipping damage (lost parts) and for $5-6 if you have a class 2 hitch you use them. I keep my set in an ammo can bolted to the fender with a big wrench, 2 lb hammer and spare sheer bolts for the bush hog. Would have given 5 stars if correct parts and treads were ok. It does what is supposed to do.
Scritto da: Ralph
Pretty nice attachment
Works well and seems like it will hold up to the work I will put it through. The only thing I dislike is the vertical square tube is completely open at the top so if left outside in the rain or snow it would fill with water and accelerate rusting. As long as you don't let it remain outside it should be fine.
Scritto da: RWP
Good value for money
This product seems like a good value for the price paid. After reading other reviews I did take extra care to clean and lubricate the lifting pin threaded holes before assembly and all went well. I am using this on a fairly light duty application.
Scritto da: C V
Can't beat it for the price, but it's going to need some work
Overall, you really can't beat this thing for the price. It came with a decent pin set too. The only negative was that the two lower pin threaded holes in the frame were loaded with shot/bead blast. The threads were damaged in one area, so I had to re-tap those threads. The threads were not deep enough to accept the pin, so the tap came in handy. Overall though, for the price I got this at, I can't really complain.
Scritto da: Jennifer Rachau
For the price don't hesitate to buy.
Just like everyone has said, the threads are filled with a bunch of crap but all I did before screwing in the stubs was PB Blast the threads and took a small wire brush to clean the threads. They cleaned up so nicely that I could spin the stubs all the way in by hand. For me there was no need for a tap to re tap the threads.
Scritto da: Phil Campbell
As advertised
I read the reviews and was prepared for the possibility of an issue with the left side threads being difficult. I took the time to clean the threads with a tap/die and that removed the paint and weld splash. fix this issue and it would rate a 5 for sure. Delivery was quick and installation other than the thread issue was easy. Have used the hitch every day since installation and am satisfied with the sturdiness and fit of this product.
Scritto da: katerina
good price/qualty ratio.
Good sturdy hitch.
Scritto da: Todd
Does the job, no problem installing pins if threads cleaned
After reading the reviews that complained about the difficulty of screwing in the pins, I bought it anyway because of the good fit of the receiver. Based on another review I inspected the threaded holes, and just like him one had a lot of metal filing from the threading process. I held the frame vertically over a garbage can and cleaned out the threads with a metal brush. Hold the threads you are cleaning at the bottom so that they fall out and not back into the other side. After a good cleaning the pins screwed in just using my fingers and I just had to give them a final tighten using a 12" long 1/4' socket drive extension through the hole in the pin. I suspect that if the filings are not cleaned out it is causing the binding when the pin is screwed in. So to summarize after the threads where cleaned it went together easily and the receiver is indeed a good fit. Highly recommend, especially for the price.
Scritto da: Yvan Roy
parfait pour sortir le bateau de l'eau et déplacer les grosse remorque
il est très solide et fit très bien sur mon trois point c'est parfait pour déplacer les grosse remorque et le bateau avec le tracteur
Scritto da: k
Awesome! 1/3 of the price dealer price.
I just put this on my new Kubota LX2610. Fit perfectly on 3-point. hitch also fit tightly. I would buy this again.

Produtos relacionados

hot
Engate de reboque Draw-Tite Multi-Fit Classe III, receptor de 2 pol., compatível com Chevrolet, Dodge, Ford, GMC, Toyota Trucks selecionados
0.1/5

€ 865.23

Engate de reboque Draw-Tite Multi-Fit Classe III, receptor de 2 pol., compatível com Chevrolet, Dodge, Ford, GMC, Toyota Trucks selecionados
0.1/5

€ 865.23

hot
Adaptador de receptor de engate de caçamba de trator Extreme Max 5001.1369 - 2
3.4/5

€ 179.27

Adaptador de receptor de engate de caçamba de trator Extreme Max 5001.1369 - 2
3.4/5

€ 179.27

hot
Engate de controle de oscilação de 4 pontos Equal-i-zer, 90-00-1001, classificação de peso do reboque de 10.000 libras, classificação de peso da língua de 1.000 libras, kit de distribuição de peso NÃO inclui haste de engate, esfera NÃO incluída 10.000 lb. bola de engate
3.6/5

€ 1422.00

Engate de controle de oscilação de 4 pontos Equal-i-zer, 90-00-1001, classificação de peso do reboque de 10.000 libras, classificação de peso da língua de 1.000 libras, kit de distribuição de peso NÃO inclui haste de engate, esfera NÃO incluída 10.000 lb. bola de engate
3.6/5

€ 1422.00

hot
CURT 49530 haste de barra de engate de reboque de aço bruto soldado de 2 polegadas x 12 polegadas
3.2/5

€ 131.81

CURT 49530 haste de barra de engate de reboque de aço bruto soldado de 2 polegadas x 12 polegadas
3.2/5

€ 131.81

hot
Engate de reboque CURT 13042 Classe 3, receptor de 2 polegadas, compatível com Chevrolet Silverado, GMC Sierra, série C
3.6/5

€ 582.34

Engate de reboque CURT 13042 Classe 3, receptor de 2 polegadas, compatível com Chevrolet Silverado, GMC Sierra, série C
3.6/5

€ 582.34

hot
CURT 45831 Engate de reboque montado em argola em D, compatível com receptor de 2-1/2 polegadas, 13.000 lbs, REVESTIMENTO EM PÓ DE CARBIDEO PRETO
3.8/5

€ 139.96

CURT 45831 Engate de reboque montado em argola em D, compatível com receptor de 2-1/2 polegadas, 13.000 lbs, REVESTIMENTO EM PÓ DE CARBIDEO PRETO
3.8/5

€ 139.96

hot
CURT 23198 Protetor de rolamento de roda de reboque de 1,98 polegadas, pacote com 2
3.7/5

€ 25.48

CURT 23198 Protetor de rolamento de roda de reboque de 1,98 polegadas, pacote com 2
3.7/5

€ 25.48

hot
Engate do receptor dianteiro CURT 31069 de 2 polegadas, Select Chevrolet Silverado, GMC Sierra 1500
3.4/5

€ 656.55

Engate do receptor dianteiro CURT 31069 de 2 polegadas, Select Chevrolet Silverado, GMC Sierra 1500
3.4/5

€ 656.55

Conheça nossa rede internacional

Enviamos para 28 países, mais de 200.000 produtos. Fique atualizado, assine a newsletter.

Array

Total:€ 0.00

Ver carrinhoConfira

Categorias

Todas as categorias
Cardápio Categorias Aproximar Carrinho

Menu